MSI MS 6168

Started by Kaitou, 11 September 2009, 09:59:42

Previous topic - Next topic

Kaitou

Hi Guys!

I have bought a MS 6168. I have several Adapters for Socket 370 to Slot 1 Support.

Is it possible to run a 1300MHz Celeron Tualatin on a standard board with a standard Bios with an adapter?

Would a test damage the board?

What modification would I need if not?

Which BIOSes are safe to flash on the Board?


greetings to my 3dfx colleagues!
 

Nightbird

#1
Hi,

Using an adapter is not really a problem (i think).
But you will need to update the bios to get a better support for an other cpu.
So what's your bios manufacturer ?
Packard Bell's MS 6168 was released with an AMI bios.
MSI's MS 6168 was released with an Award Bios and you need at least the bios 1.2 in order to support the Intel Coppermine CPU (so about the Intel Tualatin ??).
Though this is what i read about the MSI bios :
"For Intel(R) Coppermine(R) CPU support, please check first if your mainboard have a blue sticker with the letter "C" located in the I/O chip, if yes, that means your system could support Intel(R) Coppermine(R) CPU. (The Winbond83977 I/O chip is located near the bios chip".

If needeed, i own the manual for the MSI 6168.
______________________________________________

In-ter-ac-tive :
The way video games were always meant to be played
______________________________________________

Welcome to 3dfxzone.it Community
_____________________________