hello:

I have a SOYO KT-400 DRAGON PLATINIUM EDITION, you can´t install a voodoo 5 6000 on your board because your board only supoort 1.5v AGP cards.

helo

I have a voodoo 5 5500 PCI on a SOYO KT-400 DRAGON PLATINIUM EDITION & I don´t have any problen with my PCI BUS

Hello.    
   
To enable the overclock in windows XP I recommend you that you use the utility V.control of Koolsmoky.    
   
And in AM 2.5 don't have the option "GEOMETRY ASSIST" because the drivers the they possess it activated in a native way.    
   
ok?

Hello

The VSA-100 don´t have support for AGP texture, any Voodoo 4 & 5 have AGP texture, for that you can´t eneble the AGP texture.

This freature only affect to the performance.

ok?

Hello

I´m ROTOR please try to download the drivers of linux that are in the : 3dfxzone->Voodoo5->Drivers->Linux

Hello

I´m ROTOR & I´ve testing with direct draw Games to solve yours problems.

Please Wait

Hello  
 
I am ROTOR, if you have problems with games that uses Direct Draw you make the following thing:  
 
Enable -> Mip_map Dithering.  
Disable -> D3DGuardband Clipping.  
 
If you use games that also use acceleration OpenGL like Baldur´s Gate II you also make the following thing:  
 
Enable -> Mip_map Dithering.    
Disable -> Glide Guardband Clipping.  
Disable -> OpenGL Guardband Clipping.  
Disable -> Hidden Surface Removal.  
Disable -> OpenGL Z-Culling  
 
I hope with this your problem is solved.

Hello  
 
I am ROTOR  
 
If you could detail but your serious problem better. Is your card AGP or PCI?  
 
I don't have Tony Hawkes 3 therefore I cannot help you a lot, but I recommend you that you install the drivers Nikepodo 2.0 XP or the 3dhq 1.09 beta 10 to have if it solves you the problem.vvvv

Please Wait!

I don´t donwload C&C Generals again.

But, you should test the last 3dhq 1.09 beta 9 Drivers

Hello  
 
I have not finished understanding your problem very well, but I believe that you have a problem when you use OpenGL, therefore the first thing that I recommend you is that you configure the opcoines of the card in maximum compatibility.  
 
Him second that I recommend you is that if you continue having problems you place in the directory where you have installed the game the file "OpenGL32.dll."  
 
If it continues giving you problems test to use that of WikedGL or or the one that comes you together with the drivers.  
 
Third, and essential that you install the it finishes version of GLIDE of Koolsmoky.

Hello  
 
I am ROTOR I am one of those in charge of this section, as your I also have a Voodoo 5 5500 PCI besides another Voodoo 5 5500 AGP, for my the best configuration is:  
 
Global Settings:  
 
AGP Command FIFO: Auto detec  
Highest Quality video: Enable  
Refresh Optimization: Mode 2  
Via Chipset: Performance  
 
Direct3D:  
 
3DFilter Quality: Normal.  
Alpha Bendding: Sharper.  
Auto Mip-Mapping: Enable.  
D3D Guardband Clipping: Enable.      If Graphic Shortcomings, disable take place.  
Anti-Aliasing: 2x, recommended 600 Mhz.  
Edge Anti-Aliasing: Enable, Disable if your it schemes it doesn't possess 1Ghz+  
Level of Detai Bias: 0 or 0.50.  
Maximun buffered Frames: 1 slow PC, 3 quick PC.  
Mip-map dithering: Enable.  
Rendering Color Depth: Software controler or Force 32 bit.  
Speed Settings: faster ( V-Sync Disable ).  
Trilinear filtering: disable, enable if your PC it is quite quick.  
Triple buffer: disable.  
Z-Buffer Optimization: Enable.  
 
OpenGL, Glide:  
16 bit Depth Precision: Faster  
32 bit Depth Precision: Faster  
3d Filter Quality: High  
Alfa- Blending: Sharper  
Asintropic Filtering: Disable, If your PC it is very quick you can activate it  
Anti-Aliasing: 2x, recomandado 600 Mhz.    
Edge Anti-Aliasing: Enable, Disable if your PC it doesn't possess 1Ghz+  
Force 16 bit texture: disable  
Force 3DNOW instructions: Enable if your processor is an AMD at 1GHZ+  
Force MMX instructions: Enable. Pentium II or above, or AMD K6 or above  
force Voodoo Rush emulation: disable  
Glide 32 bit Rendering: Software controler or Force 32 bit.  
Glide Guardband Cliping: Disable  
Glide refresh rate: the maximum thing that it supports your monitor, I recommend 85 Hz.  
Glide triple buffer: disable.  
Hidden Surface Removal: Enable, Disable if graphic shortcomings take place.  
Legacy texture Compresion: Enable ( Always ).  
Level of Detai Bias: 0  
Limit Texture Memory: Software Controler.  
Maximun Buferes Frames: 1 slow PC, 3 quick PC.  
Mip-map dithering: Enable.  
OpenGL GuardBand Clipping: disable.  
OpenGL Z-Culling: Disable  
Speed Settings: faster ( V-Sync Disable ).  
 
For my this it is the best configuration but according to the game it can vary, for old games you can go up the quality to the maximum, for those but modern perhaps you should reduce it.  
 
To optimize your team you could go up the speed of the PCI 1 or 2 MHZ, up to 35 MHZ to optimize this way even but, I have it to 35 MHZ. ATTENTION carries out this operation carefully there am you inform yourself well of that faces you can ruin something but you

1º Uninstall the Dirvers that you have.  
 
2º Restart  
 
3º Execute Regedit and it Erases "3dfxvs" that is in "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services \ ", if it doesn't leave you you see erasing the subfolders and the keys one for one until arriving to the one to "3dfxvs", ATTENTION makes it carefully!  
 
4º once erased it restarts again and the Driver installs, if it gives you some error message you omit it, it restarts and you install it again.  
 
5º Everything should work you perfectly.

Don't change the file openGL, first because Windows 2000 & XP won't allow it and they substitute it for the generic one, and second again because then he/she gives many problems.  
 
It places the openGL file that you want to use in the direcrorio where this the executable one of the game to which want to play, and if you want to use the generic one you don't copy none and it used the generic of windows.  
 
Another similar OpenGL also exists to the WinkedGL that comes with the game Return to  Castle Wolfenstein that you can also prove if it continues without working you, anyway you to my they work me all the games with the generic one and better yield is obtained

Are you sure that these using the generic file of openGL that has Windows, if you use another one (ej. WinkedGL) put it in the directory where this the installed game.

if possible use last version of Glide of the KoolSmoky and in the configuration of openGL it tries that the quality of image predominates that the speed, Whenever flock uses new drivers the entrances of the registry, of previous drivers, "Attention" ten well-taken care of when you do it

If yet this you do not fix it, possibly you must reintalar drivers, and if continuous without working you must reintall Windows.

And please tell more information about you computer

I don´t know , what is your question but I say that amigamerlin 2.9 is only for Win 9x/Me, I don´t Know if Amigarmerlin is working in a new drivers for Windows XP