Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Axar

#1
Hello
i have problem with this cllasick serie game  all works good (loading see animation of combat in menu,Duel mode works) but  campaign and scenerios doest run they loading to half  and crash to windows i know problem  is in Pixel shaders on map  ;s on beta i dont have such problems but ok

my spec littel moded ;]
cpu:p3 800Mhz
ram:512 sdram ECC
GPU: gf4 mx (that nasty one ;] )
Motherboard:Siemens d1107 [slot-1]

i use 3d analyzer 2.36b with some caps,one time i have black scr and i hear music and sounds ;p next time when i played with config i skip PS :F but game crash as always when  map is loaded :F

i try too NVEMULATE software like 3danalyzer dev by nvidia but i dont know ho to use it

well i know in 95% that i must buy new Videocard  but mayby  someone skip this ;]
#2
Games / CS 1.6,VooDoo3 and C-D story
24 May 2006, 15:31:47
Well  i dont have that problem (with offical drivers as you mean) i install secend system win98 ^^ and dont have this error ^^

BiG THX :*
#3
Games / Problem with FPS on VooDoo
02 May 2006, 19:59:50
Hello well i have problem ;p are thare is some software that limit FPS in all Aplications/games/ and windows ? if yes pls give me a name of that program.
#4
General Hardware / GF 4 mx 440 SE ..Problem
27 April 2006, 10:14:44
well i have littel walk with this yesterday i tested  with difrent dive in to the slot and  i notice one thing cpu  start in sec light up  LED's and nothing  first idea (PSU is NOT ENOUGH) i rotate PSU and with same result
and i decide sell that crap in auction XD and buy radeon

all forum users thx 4 help but all idea's are gone to that crap
#5
Games / Counter-Strike - best performance
26 April 2006, 15:26:44
IMO you will have ~10fps if on server will be many players
#6
General Hardware / GF 4 mx 440 SE ..Problem
26 April 2006, 14:11:27
QuoteCan you check that your card is seated firmly in its slot ?
Try to press down firmly (but carefully) on the card
i do it  and with same result :/

QuoteOr maybe it's making bad contact. Make sure both the AGP slot and the video are clean.

I hope it's not, but that GF4MX might have been accidentaly damaged. A static electricity discharge kills PC equipement instantly. If someone has touched it when he was charged, even if he didn't feel it, might have caused damage to the video. Try it again on your friend's PC, to see if it's working properly.
well i clean up from dust agp slot and that holy crap GF4  does not run :F and i keep safety in electronic.

Quotehave you tried upgrading the VIDEO CARD BIOS??? If other cards work in the system, then the card is most likely the fault. do you have another gf4 mx440 to put in this rig? and does the card work in another motherboard?

well if you can tell me how to upgrade VIDEO CARD BIOS if card does not ifen start in my system

i know that card works i tested  that nvidia crap in siemens d1107 motherboard and it works and with old  motherboard typ AT with agp port and card runs  

well with this problem i write to nvidia and does not respond of them :F

i thing problem is in V on AGP ;F mayby is littel difrent i does have right now GAUGE to look this :/

if someome have idea to run that crap pls wrote ^^
EDIT
===============
Well when i have in my hand that Gf4 and Voodoo3 and see about agp slots i see one difrenc




pls look at that agp slot pins :F are that difrenc can be my problem ? or this is with all that cards ?
#7
General Hardware / GF 4 mx 440 SE ..Problem
16 April 2006, 20:52:21
yes i did tnt2 works,Radeon 9200 works ;s  VooDoo 3 works ;s GF4MX does not work ;/
#8
Games / Call of Duty
16 April 2006, 17:50:53
ps47 if you can some step by step ho do it  i will be  THANKFUL ^^
#9
Games / Call of Duty
15 April 2006, 09:53:50
on VooDoo5 is running that good but VooDoo's 3&2 ?
well i used MesaFX and have error of dont instaled openGL drivers ;s
#10
Games / Call of Duty
14 April 2006, 16:30:46
Well
i look in forum about information of playble CoD on Voodoos
i see scres,some speculation and old topics ;/.I did not wannt to cookup old topic so i write new

and my question
are on this moment game Call of Duty are "playble" on 3dfx cards
if yes pls aim me on some trick to fire that game [:p]

if not i will pray for drivers authors ^^
#11
General Hardware / GF 4 mx 440 SE ..Problem
14 April 2006, 12:05:27
well i have manual ^^
but ;s
dont read somthing  about that
http://www.elhvb.com/mboards/procomp/manuals/bvk2a-ma.zip
#12
Well well impressive ;p,are such voodoo cast can be run on V3 2000 ? ;p
i think that loading time is a horror
#13
General Hardware / GF 4 mx 440 SE ..Problem
13 April 2006, 09:48:31
i tested that gf with diffrent PSU 300W and 350W with same result
but in bios ifen on voodoo i have enbale agpx4 mode when i disable the effect is thae same as on gf monitor dont start and*beep*beep* ;s
#14
General Hardware / GF 4 mx 440 SE ..Problem
12 April 2006, 15:38:54
Well
i have
motherboard Procomp BVK2A


to the AGP this motherboard have AGP x4


and if i installthat GF4 to motherboard it is singal     *beep**beep*=no grappich card in slot ;s

i thoth that is ram problem and beeps for rams is *beep**beep* in the loop ;/ so any sugestion ?

Edit

that nasty GF are tested on AGP x2 x4 and AGP PRO ;s
   
#15
General Hardware / GF 4 mx 440 SE ..Problem
11 April 2006, 20:14:43
Well  i have buy from friend such graphic card
GF4 mx 440

and on his motherboard card runs good computer boot up nice
when i try it on my motherboard  is like no grapihc card installed ;s
AGP port is good i now write with VooDoo3 on it
so? whare is the problem  if someone have exp in such thing pls help ^^