Hi guys,
I would like to know, if is possible. How many people is owner of the v6k.
Firstly I want to know the rev. of the v6k, if this is working on (stable), where did you buy it and of where are owner from?
I would like to know drivers, overclock, System Operative and MotherBoard too?
And by to complete, if you want you can put here a photo of the your v6k! :D
I FIRST:
VOODOO5 6000 REV.3700A1 PCI REWORKS 166MHZ
FROM SPAIN
bought to AMIGA&HANK
AMIGAMERLIN XP 3.0
WINDOWS XP
MotherBoard: DFI NS72 (chipset 645 dx)
(http://club.telepolis.com/osckhar/Fotos%20voodoo5%206000/dscf0633.jpg)
SPAIN 2
CZECH REPUBLIC 1
GERMANY 1
RUSSIA 1
AUSTRALIA 1
USA 1
Thanks
Greetings
Oscar
Hi everyone:
The next week I am going to have a Voodoo5 6000 Rev (3700). When the V6k arrives I will take a lot photos. I have always wanted to have a V6K since 2000,the last week I could not Sleep because I thought that never would arrive.
Greetings
Yes,I have this beauty at home :D. It is model 3700 and revision A1. And I have it from hidden source from 3dfx engineering heaven. From 3dfx angel in USA;)
I really like this baby !!!
This is my little darling :
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/20031214223816_TEST.jpg)
295.81 KB
Rev. 2600, running stable @ 166 Mhz.
The memory is 5.4 ns, so it might run @ 183 Mhz, too.
Board : Asus P3B-F, with Celeron 1400.
System : Win98SE with Nuangels drivers.
I bought this card from a guy in texas, he found a box with 15 V5-6000 cards, some ok and some non working.
My card was sold as non working, but a former 3dfx engeneer fixed it for me.
The card runs with the internal power supply, but the photo is somewhat older, so you cannot see the wires...
Soon its gonna get a new home, I ordered a Abit SA7 mainboard along with a Pentium4.
QuoteI bought this card from a guy in texas, he found a box with 15 V5-6000 cards, some ok and some non working.
Oh my god, What guy with more luck (to find 15 v6k) [:I]
Thanks
Regards
rev 3700 here, got for free.Win98,original 3Dfx drivers with my own registry tweaks, Glide 3.10.00.30303. Works fine except DOS glide (can't get it working since Voodoo3, only V2 works)
Win98.
QuoteOriginally posted by Flash
rev 3700 here, got for free.
How free ?
Quoterev 3700 here, got for free
[:0][:0][:0]
You must tell me where! [:p][:p][:p]
yes i love the v6k i have a reworked hank model
you guys need some nice reg fixs i made for winxp and the v6000 new driver fixs
lol
Regards
ELvisaLive
i have blank screen with glide under winxp and made a reg fix
heres the fix for winxp ok guys
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\SERVICES\3DFXVS\DEVICE0]
"DefaultSettings.BitsPerPel"=dword:00000010
"DefaultSettings.XResolution"=dword:00000400
"DefaultSettings.YResolution"=dword:00000300
"DefaultSettings.VRefresh"=dword:0000004b
"DefaultSettings.Flags"=dword:00000000
"DefaultSettings.XPanning"=dword:00000000
"DefaultSettings.YPanning"=dword:00000000
"DefaultSettings.Orientation"=dword:00000000
"DefaultSettings.FixedOutput"=dword:00000000
"Attach.ToDesktop"=dword:00000001
"Attach.RelativeX"=dword:00000000
"Attach.RelativeY"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\SERVICES\3DFXVS\DEVICE0\Mon22446688]
"DefaultSettings.BitsPerPel"=dword:00000010
"DefaultSettings.XResolution"=dword:00000400
"DefaultSettings.YResolution"=dword:00000300
"DefaultSettings.VRefresh"=dword:00000055
"DefaultSettings.Flags"=dword:00000000
"DefaultSettings.XPanning"=dword:00000000
"DefaultSettings.YPanning"=dword:00000000
"DefaultSettings.Orientation"=dword:00000000
"DefaultSettings.FixedOutput"=dword:00000000
"Attach.ToDesktop"=dword:00000000
"Attach.RelativeX"=dword:00000000
"Attach.RelativeY"=dword:00000000
and also add this also
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\SERVICES\3DFXVS\DEVICE0]
"DefaultSettings.BitsPerPel"=dword:00000010
"DefaultSettings.XResolution"=dword:00000400
"DefaultSettings.YResolution"=dword:00000300
"DefaultSettings.VRefresh"=dword:0000004b
"DefaultSettings.Flags"=dword:00000000
"DefaultSettings.XPanning"=dword:00000000
"DefaultSettings.YPanning"=dword:00000000
"DefaultSettings.Orientation"=dword:00000000
"DefaultSettings.FixedOutput"=dword:00000000
"Attach.ToDesktop"=dword:00000001
"Attach.RelativeX"=dword:00000000
"Attach.RelativeY"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\SERVICES\3DFXVS\DEVICE0\Mon22446688]
"DefaultSettings.BitsPerPel"=dword:00000010
"DefaultSettings.XResolution"=dword:00000400
"DefaultSettings.YResolution"=dword:00000300
"DefaultSettings.VRefresh"=dword:00000055
"DefaultSettings.Flags"=dword:00000000
"DefaultSettings.XPanning"=dword:00000000
"DefaultSettings.YPanning"=dword:00000000
"DefaultSettings.Orientation"=dword:00000000
"DefaultSettings.FixedOutput"=dword:00000000
"Attach.ToDesktop"=dword:00000000
"Attach.RelativeX"=dword:00000000
"Attach.RelativeY"=dword:00000000
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/SuperBee/200411205541_MVC-006F.JPG)
208.61 KB
Rev. 3700 A, 440bx MoBo, Powerleap P3 1.1ghz slot1 upgrade, Win98se
Hi SuperBee,
Where are you from? :D
Thanks
Regards
Oscar
Hello osckhar, I'm from USA :D
well I don't know who has all of these:
(http://members.lycos.nl/pictures3dfx/3dfx%20Voodoo%205%206000%20AGP%20Collection%203.jpg)
"GULP"[8)] So Lauw![:0]
Hy Obi,
I have not seen it nothing [:(]
What is?
Thanks
Oscar :D
Hey Obi-Wan, this picture is from the guy who found the box with 15 V5-6000.
There is a picture with all of them, I´ll see if I can find it...
Well a friend of mine from Gathering of Tweakers in holland has a nice refference of the most 3dfx photo's I've ever seen and yes here is a link: http://members.lycos.nl/pictures3dfx/
and I suppose you mean this pic:
(http://members.lycos.nl/pictures3dfx/3dfx%20Voodoo%20Napalm%20Prototypes.jpg)
though this is the only photo I know that has prototypes on Napalm in it, if there are more photo's of it, it would be nice to share those beauty pics !.
Doen anyone here have a high res photo of the Voodoo5 6000 with the 2x2 VSA-100 layout? also if possible a shot of the back of that 2x2 VSA-100 card;)
Regards, Obi-Wan Kenobi
P.S. hey Oscar try this link:
http://members.lycos.nl/pictures3dfx/3dfx%20Voodoo%205%206000%20AGP%20Collection%203.jpg
Then I hope you know what I mean :)
OK, here you go :
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/200411522159_6000LOT.jpg)
428.76 KB
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/200411522333_2X2.jpg)
497.41 KB
well that are some very impressive photo's!! Rolo, I thank you very much for these shot's, never seen them before, by the way the first shot I see that the 2x2 model is quite small compared to the others, but what is that model above the 2x2 card?
is that an V5 6K wit 8 VSA-100's?
Hi at all,
Is very nice to see the v6k 2x2 (It is very little too), Are there prototypes v6k 2x2 working?
Somebody is owner it?
Rolo01, do you know where this lucky guy found all those cards (USA)?
Who is fortunate?
P.D. FINALLY I HAVE BEEN ABLE TO SELL MY BABY!!! :D
I have retired my v6k from ebay!;)
Thanks
Regards
oscar
@Obi-wan: I believe that 3dfx simply took some of the GPU heatsinks and bridged them accross the RAM to create ram-sinks, that doesn't look like it would be 4 more GPUs. Also, the card would have no RAM on the front!
QuoteOriginally posted by amp_man
@Obi-wan: I believe that 3dfx simply took some of the GPU heatsinks and bridged them accross the RAM to create ram-sinks, that doesn't look like it would be 4 more GPUs. Also, the card would have no RAM on the front!
Yeah you're right there, you got point! Thanx for the tip BTW!;)
Still looks funny though with all those fans.
BTW, has anyone have this Intel revision Voodoo5 6000 Rev 1000?
(http://members.lycos.nl/pictures3dfx/3dfx%20Voodoo%205%206000%20AGP%20Ects%202000%201.jpg)
And if so are these the most rarest of all Voodoo5 6000's?
The name of the guy who found the box with 15 cards is Clay, he lives in Texas. I also bought my card from him.
None of the 2x2 models are working. They have no traces on the pcb and were just demonstration objects when 3dfx wanted to show something in the early days of the development.
I know one guy in USA who has a 6000 Rev.1000, but all known cards of this type are non working. The 3dfx engineer who fixed my card tried to repair the Rev.1000, but it burned everytime you switched it on.
Yes, I think this rev. is pretty rare.
BTW, I have an interesting photo when 3dfx was thinking about a giant V3 heatsink to put on the 6k :
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/2004116132921_Voodoo_100.jpg)
33.37 KB
QuoteOriginally posted by Rolo01
The name of the guy who found the box with 15 cards is Clay, he lives in Texas. I also bought my card from him.
None of the 2x2 models are working. They have no traces on the pcb and were just demonstration objects when 3dfx wanted to show something in the early days of the development.
I know one guy in USA who has a 6000 Rev.1000, but all known cards of this type are non working. The 3dfx engineer who fixed my card tried to repair the Rev.1000, but it burned everytime you switched it on.
Yes, I think this rev. is pretty rare.
BTW, I have an interesting photo when 3dfx was thinking about a giant V3 heatsink to put on the 6k :
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/2004116132921_Voodoo_100.jpg)
33.37 KB
wOOOOt!!! Rolo that 2x2 V5 6K is really 1337!!!
It is a pitty that there are no working samples of the 2x2 card [:(]
It's size is also more relavant for people with smaller cases. I just wish that 3dfx was still alive, I really miss thier Voodoo buisness, okay the only thing we can do know is collect their wonders and dream on. The Voodoo5 6000 was actually the most impressive thing I've ever seen, just would love to own one though, okay it's free to dream I guess :)
3dfx is
The First,
The Last Eternity
Hi,
very, very interesting!
Is a pain that the rev.1000 was no working![:(]
Who is the 3dfx engineer? Perhaps so Hank? ;)
Another thing, You bought your v6k as no working, no?
All their cards were no working?
Did he sell all cards?
Thanks
Oscar :D
My card was sold as non working, but a former STB/3dfx engineer fixed it ( no, it was not Hank ). He is known as V-Man in the x3dfx forum.
Most of Clays cards were functional, only about 4 were out of order. Tweakmeisters card is one of them, i guess.
Some pretty rare models were there as well, I remember a Rev. 3400.
But all of them were sold, some on ebay and some private.
I am still curious whether there are some people that own a Rev.1000 that is working...
QuoteOriginally posted by Rolo01
My card was sold as non working, but a former STB/3dfx engineer fixed it ( no, it was not Hank ). He is known as V-Man in the x3dfx forum.
Most of Clays cards were functional, only about 4 were out of order. Tweakmeisters card is one of them, i guess.
Some pretty rare models were there as well, I remember a Rev. 3400.
But all of them were sold, some on ebay and some private.
I am still curious whether there are some people that own a Rev.1000 that is working...
yeah me too, it might work better on Pentium4 based machines than AMD's because of that large Intel chip on it , or am I mistaken, Rolo? :)
But anyways, isn't she sweet:
(http://members.lycos.nl/pictures3dfx/3dfx%20Voodoo%205%206000%20AGP%202.jpg)
I still wouldn't mind having one of these! :D :D :D
well yeah, I am wondering if there is a working Rev 1000A.
QuoteOriginally posted by amp_man
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">rev 3700 here, got for free
Quote
[:0][:0][:0]
You must tell me where! [:p][:p][:p]
It was only one card, from one french guy who works for game development company, they got card for testing, benchmarking etc...
Not so impressive as box with 15 V5 6K:D
P.S. One fellow simply shocked me - "I've got working PCI V5 6000" [:0][:0][:0]
It was not V5 6K but Quantum 3D stuff :D :D :D Very good thing but not so rare, at least it exists unlike PCI V5 6K
yes we all know of clay , i tryed to deal with him 2 years ago when he got the box of 16 v6ks
he seems i heard a few storys of how he sold people non-working v6ks and had to swap a few, other out there claimed he took money without sending the v6k, we assume it be some jelous 3dfx users, does anyone know the true story
i phoned him a few times and clay told me how he got the v6000 from the dallas 3dfx facotry which only shut down 2.5 years ago
non of the v6000 he had would of had hanks v6k mod fix and im sure theres a few non working v6ks out there awaiting to be fixed
regards
ELviSALive
oh ya i own a v6000 3dfx card and am the happest 3dfx users on planet earth
thanks to hank and koolsmokey for the excellant drivers support for the v6k and blank screen fixs
Regards
ELvisALive
QuoteOriginally posted by ElvIsAlive007
oh ya i own a v6000 3dfx card and am the happest 3dfx users on planet earth
thanks to hank and koolsmokey for the excellant drivers support for the v6k and blank screen fixs
Regards
ELvisALive
Aloha Elvis,
Well good for you!
Anyways, do you know if there is still a working model of the Intel Rev 1000?
Maybe you could get us further. and what is the ramdac of the V5 6K? 350Mhz like the other VSA-100 based cards of is it 400Mhz?
Regards,
Obi-Wan Kenobi
P.S. I don't need a V6K to be the happiest 3dfx user on the plannet, I have 25 different 3Dfx/3dfx cards,which makes me a little happier;) But wanting one of those V5 6K's means something totally different.[:o)]