3dfxzone.it WorldWide Community

3dfx Hardware & Software => General Discussions => Topic started by: ciacara on 18 February 2021, 20:23:47

Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: ciacara on 18 February 2021, 20:23:47
Update 19/02/2021

Hello everybody,
unveiled the nickname :D of Anthony's new creation:

Napalm 6000 S.U.X.

Special
Unified
Xcelerator

Taken from the announcement post:

(https://i.ibb.co/f1fxFTs/V56k-New7.jpg)
https://ibb.co/f1fxFTs


Hello everybody,
first images of the new project by developer Anthony:

A new Voodoo 5 6000![:0]

As stated by the developer, the graphics card he created is identical to the 3dfx voodoo5 6000, the same Bios, drivers and performance (for now) are identical to the 3dfx video card.

This board was created with the non-destructive Reverse Engineering technique, thanks to which it was possible to obtain the entire electrical and functional diagram and the components of an original 3dfx without destroying it.
I would also add that the PCI connection and the new redesigned pcb of the video card have been improved!

The original V56K was loaned to him by a very dear friend of mine who lives in Argentina, Alexey Chigirev, known for his passion for the 3Dfx world and beyond.
A warm Thanks goes to Alexey!;)


you will find this News and all the other creations, mods, etc etc created by Anthony.

Thank you so much Anthony!:)

(https://i.ibb.co/t3fHxGx/V56k-New.jpg)
https://ibb.co/t3fHxGx

(https://i.ibb.co/Kq4MN6z/V56k-New2.jpg)
https://ibb.co/Kq4MN6z

(https://i.ibb.co/pXKVTzL/V56k-New3.jpg)
https://ibb.co/pXKVTzL

(https://i.ibb.co/fNJVzKk/V56k-New4.jpg)
https://ibb.co/fNJVzKk

(https://i.ibb.co/GTTt51w/V56k-New5.jpg)
https://ibb.co/GTTt51w

(https://i.ibb.co/ZKZw2WD/V56k-New6.jpg)
https://ibb.co/ZKZw2WD
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: Nightbird on 20 February 2021, 16:23:25
Guru3D (https://www.guru3d.com/news-story/3dfx-voodoo-5-6000-video-card-reverse-engineered-and-re-created-by-enthusiast.html)
:)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: ciacara on 23 February 2021, 22:13:55
QuoteOriginally posted by Nightbird

Guru3D (https://www.guru3d.com/news-story/3dfx-voodoo-5-6000-video-card-reverse-engineered-and-re-created-by-enthusiast.html)
:)

Hello Nightbird,
thanks for reporting me ... ;)
I didn't answer you before because the notification email went to the spam folder ... [:p]
However, in the description of guru3d there is an inaccuracy because the video card is not pci-e but pci and the additional power supply is there but it is internal with mollex 4 pins:

(https://i.ibb.co/5jJpdLz/Guru3d-2.jpg)
https://ibb.co/3FP6wc8

Maybe it will be the rush to write a news with little information available ...[:p]
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: m14radu on 12 March 2021, 19:42:37
amazing work !!!
cant wait to see the card in action :)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: ciacara on 21 March 2021, 09:23:10
QuoteOriginally posted by m14radu

amazing work !!!
cant wait to see the card in action :)

Hi m14radu and welcome back,
I'm also curious to see it, I also prepared the soldering iron and the drill for the first mods :D

Seriously, I can't wait to check the real performance and how it behaves with the various platforms and games available.
If could create a set of drivers, or adapt the latest ones available, it would be a big step forward.

See you. :)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: m14radu on 24 March 2021, 18:21:32
i bet it would run smoothly :)
would be nice to get the 256mb version or even 512mb :)
( remeber the v4 from Komponent moded to 128mb ? )

and with dvi or hdmi....would be awensome !!!!
see ya !
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: ciacara on 27 March 2021, 10:53:14
QuoteOriginally posted by m14radu

i bet it would run smoothly :)
would be nice to get the 256mb version or even 512mb :)
( remeber the v4 from Komponent moded to 128mb ? )

and with dvi or hdmi....would be awensome !!!!
see ya !

Yes, I remember the Komponent mod, it was legendary as a mod, it exceeded all the expectations of the official 3dfx statements!
I remember that he had made a diagram of the v4 4500 with high resolution photos and modified bios, but nothing is found online, at least I have not found it ...

For the dvi / hdmi output I think there are limitations in the drivers that do not allow to extend the signal to 4 vsa-100 chips, but only with two chips ...
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: m14radu on 02 April 2021, 20:08:07
i might have the pictures somewhere on my drive if needed :)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: ciacara on 09 April 2021, 05:56:38
QuoteOriginally posted by m14radu

i might have the pictures somewhere on my drive if needed :)

Man, if you can recover the photos of the works and the modified bios, it would be a great contribution from you ...;)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: m14radu on 10 April 2021, 15:41:02
i do my best :)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: Obi-Wan Kenobi on 05 August 2021, 14:36:12
Maybe an idea to post news of that new AGP variant  Ciacara  :)
Title: Napalm 6000 S.U.X. Project! The Phoenix is ​​about to be Reborn!
Post by: ciacara on 06 August 2021, 01:24:43
QuoteOriginally posted by Obi-Wan Kenobi

Maybe an idea to post news of that new AGP variant  Ciacara  :)

Hi, replied with PM.