Hi
This is my first post, i from poland and my english is very not good :)
I have one question.
First my komp:
Duron 800
192 SDRAM
Voodoo 3 / 2000
Sound blaster live
I cant play in 'Need for speed underground"
Why ??
What drivers/operating system are you using?
System:
Windows XP Profesional
Driver:
v3-w2k-xp-1.09-beta10
amigamerlin3.0finalbuildfull
Question : you had "mixed" the drivers ?
since the amigamerlin3.0finalbuildfull are for the V4/V5
:) I don't know :)
Ok now unistal amigamerlin3.0finalbuildfull
and only install amigamerlin3.0finalbuildfull
Need for speed - i cant play :(
My question amigasport3.0finalbuildfull for voodoo3 ??
Sorry my english !!
:D :D :D :D
Sory
and only install v3-w2k-xp-1.09-beta10
[:I]
Try uninstalling all your video card drivers, until your card is set as as Standard VGA controller or whatever, and make sure that you get them all out. Then install AmigaSport 3.0, and let us know what happens. AmigaMerlin 3.0 is not for voodoo 3 cards, only for voodoo 4 and 5, so it will mess things up for you.
i can't play a need for speed underground
driver: default of windowsXP (only sound play and nothing see)
driver: voodoolizer 1.05.00 WinXP 2K (opening NFS later auto-reboot pc "alone" :/
driver: amigamerlin3.0final (open nfs and crashed or "bluescreen")
my config
Asus CUSL2-C
P3 - 866MHZ
512MB
Voodoo 4 4500 AGP 4X
Windows XP (english version)
i got blank screen
I'LL MAKE THIS CLEAR FOR EVERYONE.......[:(!]
IF U WANT TO PLAY NEED FOR SPEED UNDERGROUND WITH A VOODOO 4/5 VIDEO CARD, U NEED TO HAVE WINDOWS 98 INTSALLED.
FOR THE TIME BEING IT CANNOT BE PLAYED WITH WINDOWS XP! [}:)]
i cant play Need For Speed Underground either...
my pc specs are:
Windows XP Home Edition
AMD Duron 1GHz
384MB SDRAM
C:, Total: 10.3GB, Free: 6.5GB
D:, Total: 46.8GB, Free: 24GB
Connection: Blueyonder Cable Internet 512kbit
GFX: SiS 630/730 64MB (On Board Video Card using 64mb from the 384mb sdram)
i am having problems playing it...
the startup movie plays but its a bit laggy.
as soon as im past that movie the user menu cannot be seen... the music menu in the bottom left corner is all blurred and the options on the right are all blocky and cannot be read.
I know games play because i have played Vice City.. and I think that game uses more power. I have no Setups on my CD for acceleration so if anyone has anything for me please help out :/
simon92922, plz post your issue in the non-voodoo gaming section of the forum. ;)
hey all,
me too i ve got 1 problem...
after launching setup.exe the list of rendering 3D is emply!
why nfs dont found my V3 2000?
K7 800
256Mb Ram
A7V
Voodoo 3 2000
DX 9.0b
win 98
SB Live
Hi, I think voodoo 2 and NFSU are working in my system, using the game 3d setup and selecting glide device the game works fine 800X600 pixels. I use windows XP and voodoo 2 drivers from 3dfxzone.
my sytem:
athlon xp 2600+
256 mb pc2700
Geforce 4 mx440 (worst card ever)
voodoo2
Need For Speed Underground doesn't support the Glide ;)
What NFS are you playing ?
I think that it's running on your GF4, not the V2. As nightbird already stated, this game has no glide support, nor opengl, just direct3d.
Hi everyone, this is my first post. I´m from Argentina.
Well, I have a PIII 800EB MHz, with 512Mb Ram, and ....(and here comes the star) a voodoo 4500 agp 32Mb. All this running over a Epox mother board 3spa3L. Al this is been controlled by WinXP SP2.
Any time I try to run Need for Speed Underground it happended to do :
A). Although I`ve tried from the originally drivers to the
Amigarling 3.1SR I ONLY GET THE ALL SYSTEM RESTARTED.
Only with SSFA beta release I could see and error label.
It seems to be something wrong with the "3dfxvs.dll" file.
I also tried 3DAnalyze with no results.
B). Only with the drivers got on microsoft I could see this:
(//)
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/regivoodoo/20041110121620_Dibujo2.JPG)
33.9 KB
Okey then, If there is someone how have ever had this sort of luck runnig NSU PLEASE....HELP ME WITH SOME OF YOUR MAGIC.
Since now thank for all fellows.
microsoft driver for vsa-100 / xP edition ? wich driver is that ?
This is the driver that MS provides with XP.
YES...MicroSoft knows about voodoo 4500/5500....
But...to tell you the true....I thougth you migth have tried this already???? I´ll has it mailed to you rigth away.
Don´t you think a possible solution for my problem???? Perhaps a patch or something like that. See you.
Its a driver problem, I have looked at this but havn't managed to fix this under XP although strangely enough it seems to work better under W2K with intermittent reboots rather than everytime, this is with a test driver though.
SFFT
Need for Speed Underground should work under XP with the next SFFT alpha release. It seems to work in DX7 Mode with the current driver the SFFT Alpha 19.
SFFT
i can´t get it to work...
* in dx8 mode, i get "blue screen" (with a 3dfxvs.dll error) after the loading logo screen
* in dx7 mode, it doesn't start/launch at all (the desktop/windows explorer stays...)
winXPsp2, nfsuDEMO, v4500, alpha19
I have seen it fail to start occasionaly but it usually starts a second time. I have fixed the BSOD under DX8 mode in the next driver. At least that is was happens on my XP test machine with the Alpha 19, it usually runs fine under W2k.
SFFT
Hi guys,
This is my first post and I´m from Portugal. My english is very poor, so please forgive me my mistakes :)
What drivers I need to run Need For Speed Underground win XP with a Voodoo 5500?
Any sugestions?
I already tryed SFFT alpha 22. The game runs but blocks right away and returns to windows. Only appears the loading screen :(
Try running the game again, I find that it loads under XP the second time if it fails the first.
SFFT
QuoteOriginally posted by SuperFurryFurryThing
Try running the game again, I find that it loads under XP the second time if it fails the first.
SFFT
I´ve tryed 5 times and get same problem ;(
execute set3title.exe (somewhere in the ZIP file), then Reboot the PC (maybe it can help......)
Or try to set your Voodoo5 to single chip mode...
QuoteOriginally posted by ggab
execute set3title.exe (somewhere in the ZIP file), then Reboot the PC (maybe it can help......)
Dont work :(
QuoteOriginally posted by Rolo01
Or try to set your Voodoo5 to single chip mode...
Same problem...
Any more sugestions? :)
@ Divvy
I tried NFSU today with the Alpha23 drivers on my Voodoo4, it runs great.
I guess your drivers are not installed correctly.
What do you see when you look into your display properties ?
Does it say 3dfx Voodoo5 or 3dfx Voodoo Series ?
When it says Voodoo5 then the SFFT drivers are NOT active.
I had this problem once and then I changed my way of installing the drivers, now it works.
Here is what I did ( Screens are from german WinXP, I dont know the exact english terms, but you should recognize the screens, just follow the red boxes... )
First, I unzip the SFFT package to a directory ( i.e. C:\temp\3dfx )
In device manager, I open properties of my graphic card :
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/20052819518_1_1.JPG)
31.82 KB
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/200528195133_2.jpg)
36.33 KB
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/200528195156_3.jpg)
41.15 KB
Image Insert:
(https://www.3dfxzone.it/enboard/../public/uploaded/Rolo01/200528195217_4.jpg)
38.04 KB
Now I choose the directory that I created before ( C:\temp\3dfx ).
You can ignore the compatibility issue that is popping up.
Now restart and you are good to go...
Hope this helps...
Hi Rolo01,
Thanks for your answer.
I check the proporties and it shows: "3dfx Voodoo Series", so install is fine.
But I have installed alpha22 and not 23.. where can I found and download alpha23?
Tks
here: https://www.3dfxzone.it/news/reader.php?objid=632
Hi, i'm from brazil and this my first post (duhh), I have athlon xp (1.7), with 128 ram ddr, windows xp an VOODOO 5500 64mb AGP. My only problem is when i try to play undergroung my machine i reboot.
I'm work with amiga merlin 3.0, directx 9.0c (with control panel) and this settings: https://www.3dfxzone.it/dir/3dfx/bestsettings/am30xp.htm
Tank you for attention
PS: sorry about my bad english :P
you need SFFT driver.here:
https://www.3dfxzone.it/news/reader.php?objid=796
Great! Underground is runnig!
NOw next step: NFSU is workin in low details, when i put medium details the program close the window an return desktop.
Any sugestion?
Tank you for attention again ^^
try to report it to SFFT,here:
http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=1129&whichpage=37
ok i will report now.