well i got my stb v2 today,and I want to put it in sli with my creative v2,but with legendgrafix,it appears with pink colors and with the other mm driver for xp..I cannot do nothing.
koolsmoky's xp driver has mismatched support,here:
http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=1839
Hello,
i have Voodoo2 Sli Mismatched Cards and need a Driver for WinXP with DirectX.
When i install this driver above the cards are installed but i dont know they really work.
In directX, there is only my graphic card, my voodoo2 are not present.
With win98se they worked perfect, but i must install winxp because i have now 1024mb and they wont work corect with win98.
The Fast voodoo2 XP are good drivers but only for matched cards. Can someone make new drivers with mismatch support?
Sorry for my english, iam German.
Thank you for the help!
check my previous post,those are xp drivers with mismatched support.but they dont support D3D,they run only opengl/glide.if you want D3D support,your only option is the Voodoomage2 driver (http://voodoomage.uw.hu/indexeng.html)..
Do i need both drivers or only one?
I forgot the 9 by DirctX in my post above.
I have WinXP and DirectX9. My System is Elitegroup K7S5A, AMD XP2000+, Geforce4 MX 64MB and 1024 DDR Ram.
Because my Graphic Card is using Direct 3D, i only need Glide drivers, right?
The Glide driver works, but Directx9 dont't show the Voodoo2 Cards.
I have tested Incubation, it shows in the right corner 3DFX, can i turn off this?
I cant understand this language from the software. The Cards are only in system list, no changes for the cards are aviable.
dx9 wont show anything.this is normal.if you are using the Voodoomage2 driver,the control panel can be found in your start menu (there should be an option to turn of the logo).and yes,unfortunately not everything is in english.basically,if you dont need Voodoo2 D3D support badly (your geforce card supports D3D so you dont really need it),I would suggest you uninstall Voodoomage2 and use a "standard" voodoo2 xp driver (the one from koolsmoky for example).its enough for incubation if that (great btw) game is what you want to play..
or in short words:
standard setup:
latest koolsmoky's driver + Leinen Voodoo2 Tweaker.great speed and compatibility,the control panel will allow you to tweak almost anything.but supports only glide/opengl.the cards are shown under sound,video and game controllers.
experimental setup: Voodoomage2 driver.support for glide/opengl/D3D,but ist usually slower and less stable.its hard to tweak,standard tweakers dont work.can mess your registry if you are not carefull enough.the cards are shown under graphics adapters.
Incubation is not the only Game i have that use 3DFX, i have a lot.
most of the games from the 3dfx era use glide for rendering,so you should be fine with the standard setup most of the time.there are few games that require voodoo2 D3D to run properly,however they are not too common.as I said,the standard setup should work perfect for most of your 3dfx games.
koolsmoky's voodoo2 driver (https://www.3dfxzone.it/public/uploaded/koolsmoky/200553224214_Voodoo2.zip).fixed to work under xp to work without errors.(supports glide and opengl,but you will need a standalone driver for opengl,see here (http://www.shifter.sk/helppage/default_fix.htm#SLI) for details)
Voodoo2 Tweaker V1.1 (sorry,no direct link,scroll down a bit and you will see it) (http://www.falconfly.de/tools.htm).allows you to change refresh rates,enable/disable SLI,enable/disable 3dfx logo,v-sync and more.
I know don't use the voodoo cards anymore.
The driver lets the system crash, i only open directx9 diag, after a few seconds it appears every new start, when i make dxdiag.
Now the cards are out of the system, and there is no crash.
If some one have the same problem and same system take the cards out.
My system K7S5A (HoneyX Bios), 1024 MB Ram, XFX Geforce 4 MX440.
Voodoo2 R.I.P. for me. [:(]
If you have problems with this driver and IF you want absolutely a support for D3D, the best would be a second and legacy system with Win9x.
The Problem is when i make win98 on my system, my 1024mb only work with 512MB.
Win98 dont support 1024MB.
Why do you need 1024 ram ?
I had two different in my faster PC, one Infineon and one Nanya, they work together, but i buy two same (Infineon), because i think two of the same work better. I dont want to sell one 512MB, than it is better in the pc befor i put it useless anywhere.
I often play now newer games on my second pc.
@Martin Benz:
http://exuberant.ms11.net/98sesp.html
Ever heard of this?
It is english, but iam German.
I loadet something like that in German but it blocked 512mb.
I have seen there is a German link, but it is the same like taking one 512mb out of the pc.
That software blocks 512mb all over is useless.
Strange, because they clearly declare that the 512MB limit is no more; however i have just 512MB, so the issue stays exotic to me;-) What about 1.6.x version, also available? Perhaps 2.0.1 is not "polished" yet;-)
You have 512MB? That works but 1024MB dont work with this update.
The limit is 512MB, you can check this anywhere, but i dont know where.
I have seen it on my win98se, there was a point with 512 MB limit in the list.
http://support.microsoft.com/kb/253912/en-us
Look here there is what the sp makes.
weel,now that my radeon 9600pro is fckd..my only solution is using my v2's on my pc to play some games..for primary cards I have a matrox millenium 2mb and a ati rage II+DVD 4mb,what is the best?
I used koolsmoky's drivers,because I have mismatched cards..but now I don't have that panel that comes with the fastvoodoo2 and how can I know that my cards are working good in SLI?
my stasndard test is deus ex demo running in the 1024*768 resolution.as for control panel.leinen tweaker works way better then the malfunctioning control panel that is included in the regular xp drivers.no offence.search for Voodoo2 Tweaker V1.1 here: http://www.falconfly.de/tools.htm