21 Feb 2010
Voodoo2(TM) Based 3D Accelerators Driver Kit for Win2K/XP/VISTA 32bit

Glide Driver Version: Sourceforge 2.57.0.6528 (beta)
Glide3 Driver Version: Sourceforge 3.4.0.6528 (beta)
Voodoo Graphics Windows Driver Version: 4.3.0.1105 (beta)

Copyright 2010
http://glide.sourceforge.net
http://www.3dfxzone.it

This kit contains Glide2x, Glide3x drivers for Voodoo2 Based 3D
Accelerators. The Glide drivers are bleeding-edge builds from 
glide.sourceforge.net. Besure to uninstall previous V2 drivers 
before installing this kit.

Notes:
- Removed dirty hacks from the windows miniport driver. Fixes
  potential system hangs on modern systems.
- The driver inf will set SSTV2_RGAMMA, SSTV2_GGAMMA, SSTV2_BGAMMA
  to 1.00
- Added grStippleMode and grStipplePattern. Using Glide64, Mario
  will now do his dissolve trick properly.
- Includes fixes for memmap errors and desktop corruptions.
- Optimized for 3dnow! and mmx.
- FX_GLIDE_SWAPINTERVAL = 0 will force VSYNC off. V2 SLI may have 
  problems syncing the scanlines when VSYNC is off.
- Alphablending dither subtraction is disabled by default. Set 
  SSTH3_ALPHADITHERMODE = 3 to enable dither subtraction.
- 4x4 dither matrics is used when alphablending dither subtraction
  is enabled. Other wise it's always 2x2.
- Set SSTV2_MISMATCHED_SLI = 1 for mismatched SLI support. This may 
  not work due to differences in V2 board design. If you have problems 
  try swapping the PCI slot order of the V2 boards. 
- If the screen goes blank but you still hear the application running 
  in the background, reconnect your display and pass-through cable to 
  the second V2 or set SSTV2_SWAPBOARDS = 1
- Win9x/ME: copy glide2x.dll and glide3x.dll to c:\windows\system
- Quantum3D Obsidian2 X-24, X-16, and similar SLI boards must have
  the following set.
  SSTV2_FT_CLKDEL = 5 
  SSTV2_TF0_CLKDEL = 7 
  SSTV2_TF1_CLKDEL = 7 
  SSTV2_TF2_CLKDEL = 7 
  SSTV2_SLIM_VIN_CLKDEL = 3 
  SSTV2_SLIM_VOUT_CLKDEL = 2 
  SSTV2_SLIS_VIN_CLKDEL = 3 
  SSTV2_SLIS_VOUT_CLKDEL = 2 
  SSTV2_GRXCLK = 90

Visit the V2 section of the 3dfxzone forums at
http://www.3dfxzone.it/enboard/
for more info.

Enjoy,
Hiroshi "KoolSmoky" Morii
koolsmoky(at)3dfxzone.it