3dfxzone.it ~ SFFT Drivers ~ MesaFX ~ 3D-Analyze ~ 3dfx Headlines ~ 3dfx Cards ~
Home | Profile | Register | Active Topics | Members | Search | GoogleSearch | FAQ | 3dfxzone.it
Username:
Password:
Save Password
Forgot your Password?

 Index
 3dfx Hardware & Software
 General Discussions
 Wich 3D software to know if my VooDoo2 work well .
 New Topic  Reply to Topic
 Print topic

Author Previous Topic Topic Next Topic  

mickey
Novice

France
1 Posts

Posted - 08/02/2004 :  23:29:30  Show Profile  Visit mickey's Homepage  Reply with Quote
hi,
i am a new member.
i have installed a matrox 4 Mo + VooDoo2 3Dfx 12 Mo on a 233 MMx + 256 Mo Ram
and i have some trouble with this installation.
then i would like to know :
Wich 3D software to know if my VooDoo2 work well.
and especially the hardware acceleration.
when i launch Dxdiag.exe he tell me :
------------------------
------------
DxDiag Notes
------------
DirectX Files Tab: The file directx.cpl is an old version, which could cause problems.
Display Tab 1: Hardware-accelerated Direct3D 8 is not available because the display driver does not support it.
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code) Direct3D 8 test results: Display driver does not support API (DDI version too low) Direct3D 9 test results: Display driver does not support API (DDI version too low)

Display Tab 2: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it.
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC) Direct3D 8 test results: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available) Direct3D 9 test results: Display driver does not support API (DDI version too low)
------------------------
And Also :
------------------------
---------------
Display Devices
---------------
Card name: Matrox Millennium PCI
Manufacturer: Matrox Graphics
Chip type: 2064W
DAC type: TVP 3026
Device Key: Enum\PCI\VEN_102B&DEV_0519&SUBSYS_00000000&REV_01\BUS_00&DEV_0B&FUNC_00
Display Memory: 4.0 MB
Current Mode: 1024 x 768 (16 bit)(optimal refresh rate)
Monitor: GoldStar 1460 Plus VGA
Monitor Max Res: 1024,768
Driver Name: mgapdx64.drv
Driver Version: 4.10.0001.4120 (English)
DDI Version: 3
Driver Attributes: Final Retail
Driver Date/Size: 8/28/1998 10:57:24, 223232 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: *vdd,*vflatd
Mini VDD: mgapdx64.vxd
Mini VDD Date: , 0 bytes
Device Identifier: {D7B71ECB-4659-11CF-A873-0120A4C2C935}
Vendor ID: 0x102B
Device ID: 0x0519
SubSys ID: 0x00000000
Revision ID: 0x0001
Revision ID: 0x0001
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code)
D3D8 Test Result: Display driver does not support API (DDI version too low)
D3D9 Test Result: Display driver does not support API (DDI version too low)

Card name: 3dfxzone.it FastVoodoo2 4.0 Gold Edition
Manufacturer:
Chip type:
DAC type:
Device Key:
Display Memory: 10.0 MB ???????????
Current Mode:
Monitor:
Monitor Max Res:
Driver Name: 3dfxV2.drv
Driver Version: 4.11.0001.1150 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 11/18/1999 16:39:14, 40012 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD:
Mini VDD:
Mini VDD Date: n/a, 0 bytes
Device Identifier:
Vendor ID:
Device ID:
SubSys ID:
Revision ID:
Revision ID:
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC)
D3D8 Test Result: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available)
D3D9 Test Result: Display driver does not support API (DDI version too low)

------------------------
My Monitor is GoldStar 1460 Plus VGA.
Then what is your opinion, sorry for all those détails

Ooops i did it again !

Shogakusha
Novice



36 Posts

Posted - 09/02/2004 :  05:08:31  Show Profile  Visit Shogakusha's Homepage  Reply with Quote
Dxdiag won't run any of the tests with voodoo 2 or voodoo 1 if you have directx 9 installed, it will run the tests if you have directx 8 installed but there's no reason to do that, as games seem to run fine anyway. Go to www.futuremark.com and download the 3dmark99 if you want to make sure directx is working on your system, you could try 3dmark2000 but I'm not sure it will work on the voodoo 2.

Comp 1:
- Windows XP Pro
- Athlon 2500XP
- MSI K7N2 Delta motherboard
- 512 meg of 333mhz ram
- Radeon 9700 Pro
Comp 2:
- Windows 98 SE
- Pentium 2 - 333
- 64 meg of pc100 ram
- Cirrus Logic Laguna 5465 vid card
- Monster 3d card
Comp3:
- Windows 98SE
- Duron 800Mhz
- 192Meg of pc100
- Voodoo 3 2000
Go to Top of Page

My_Spleen
Novice

23 Posts

Posted - 03/09/2004 :  08:12:19  Show Profile  Visit My_Spleen's Homepage  Reply with Quote
quote:
Originally posted by mickey

hi,
i am a new member.
i have installed a matrox 4 Mo + VooDoo2 3Dfx 12 Mo on a 233 MMx + 256 Mo Ram
and i have some trouble with this installation.
then i would like to know :
Wich 3D software to know if my VooDoo2 work well.
and especially the hardware acceleration.
when i launch Dxdiag.exe he tell me :
------------------------
------------
DxDiag Notes
------------
DirectX Files Tab: The file directx.cpl is an old version, which could cause problems.
Display Tab 1: Hardware-accelerated Direct3D 8 is not available because the display driver does not support it.
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code) Direct3D 8 test results: Display driver does not support API (DDI version too low) Direct3D 9 test results: Display driver does not support API (DDI version too low)

Display Tab 2: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it.
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC) Direct3D 8 test results: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available) Direct3D 9 test results: Display driver does not support API (DDI version too low)
------------------------
And Also :
------------------------
---------------
Display Devices
---------------
Card name: Matrox Millennium PCI
Manufacturer: Matrox Graphics
Chip type: 2064W
DAC type: TVP 3026
Device Key: Enum\PCI\VEN_102B&DEV_0519&SUBSYS_00000000&REV_01\BUS_00&DEV_0B&FUNC_00
Display Memory: 4.0 MB
Current Mode: 1024 x 768 (16 bit)(optimal refresh rate)
Monitor: GoldStar 1460 Plus VGA
Monitor Max Res: 1024,768
Driver Name: mgapdx64.drv
Driver Version: 4.10.0001.4120 (English)
DDI Version: 3
Driver Attributes: Final Retail
Driver Date/Size: 8/28/1998 10:57:24, 223232 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: *vdd,*vflatd
Mini VDD: mgapdx64.vxd
Mini VDD Date: , 0 bytes
Device Identifier: {D7B71ECB-4659-11CF-A873-0120A4C2C935}
Vendor ID: 0x102B
Device ID: 0x0519
SubSys ID: 0x00000000
Revision ID: 0x0001
Revision ID: 0x0001
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code)
D3D8 Test Result: Display driver does not support API (DDI version too low)
D3D9 Test Result: Display driver does not support API (DDI version too low)

Card name: 3dfxzone.it FastVoodoo2 4.0 Gold Edition
Manufacturer:
Chip type:
DAC type:
Device Key:
Display Memory: 10.0 MB ???????????
Current Mode:
Monitor:
Monitor Max Res:
Driver Name: 3dfxV2.drv
Driver Version: 4.11.0001.1150 (English)
DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 11/18/1999 16:39:14, 40012 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD:
Mini VDD:
Mini VDD Date: n/a, 0 bytes
Device Identifier:
Vendor ID:
Device ID:
SubSys ID:
Revision ID:
Revision ID:
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC)
D3D8 Test Result: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available)
D3D9 Test Result: Display driver does not support API (DDI version too low)

------------------------
My Monitor is GoldStar 1460 Plus VGA.
Then what is your opinion, sorry for all those détails

Go to Top of Page

secretfj
Average

Hong Kong


259 Posts

Posted - 04/10/2004 :  14:17:10  Show Profile  Visit secretfj's Homepage  Send secretfj an ICQ Message  Click to see secretfj's MSN Messenger address  Reply with Quote
Actually 3DMark 2001SE will run fine with V2

No way a 3DFX collector...just a 3DFX die Hard Player~~

let the VooDoo Roars!!

P4 Extreme Edition 3.4GHz
Asus P5AD2 Deluxe i925x
2GB DDR2 667 DDRRAM
Voodoo 5 5500PCI

Edited by - secretfj on 04/10/2004 14:17:44
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Print topic
Jump To:

 

Forum Rules

Legal Info

Privacy

Contact Us

3dfxzone.it

HWSetup.it

ForumZone.it

 

All trademarks used are properties of their respective owners - Forum Graphics and Contents © 2001 - 2014 3dfxzone.it - Forum Engine © Snitz Forums