Does Voodoo3 2000 support LCD monitor????

Started by Teff, 11 December 2005, 08:21:22

Previous topic - Next topic

Teff

Hi,everybody.:)
As you all know, I have a Voodoo3 2000(8MB).:D
And, I want to know that, does my card support LCD monitor?????;)
It's because I want to buy a LCD monitor recently, [8D]
and I don't know whether my card support LCD monitor or not.[|)]
Please tell me, thank you very much!!! :D
Always powered by:
CPU:Pentium III 500Mhz
RAM:256 RAM
Video card:
Voodoo 3 2000(8MB)
Driver:
AmigaMerlin V2.9  (9x/ME)
DirectX 9.0c
MesaFX-6.3(the lastest version)

O.B. 1

#1
About that too: Voodoo Mac cards have DVI connector, but it's not the current standard. Do they need special compatible monitors to use the DVI feature, or is it possible to use any LCD-TFT with Voodoo MAC series? I never saw the DVI connector on modern monitors, but I know that new video cards use slightly different DVI pinout, so my question is: would it be possible to physicaly plug in a new modern LCD-TFT monitor into a Voodoo Mac DVI conector or would it need a adapter or a old-style compatible monitor?
See also:
http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=2281
 

ps47

teff: you will need a LCD monitor that uses the standard 15-pin d sub connector.last time I checked,Benq was still selling them..

trigger

#3
I got a CMV CT-720D recently and that worked fine with a voodoo5 5500 MAC.


http://www.cmv.com.tw/en/product.asp?pid={7D0F23D1-529E-4152-8FD9-E18B9FF7C33C}


CMV CT-720D Technical Specifications
---------------------------------------
Type : 17-inch active panel TFT display
Native Resolution : 1280x1024
Active Display Area : 338 x 270mm
Brightness : 450cd/m²
Contrast Ratio : 500:1
Response Time : 8ms
Dot Pitch : 0.264mm
Color Resolution : 16.7 million colors
Viewing Angle : 140° (V) x 160° (H)
Bandwidth : 135MHz
Analog : RGB Analog
Digital : DVI-D
Horizontal Frequency : 28~82KHz
Vertical Frequency : 50~76Hz
Power Consumption : 45W
Power Saving Mode : 3W
Physical Dimentions : 416(W) x 404(H) x 216(D) mm
Voodoo5 5500 AGP
Voodoo5 5500 PCI DVI x3 (exorcised MAC cards)
Voodoo4 4500 PCI
Voodoo2 1000 PCI x4 (two boxed and factory sealed)
Voodoo1
miroHISCORE 3D
Canopus PURE3D

Teff

QuoteOriginally posted by trigger

I got a CMV CT-720D recently and that worked fine with a voodoo5 5500 MAC.


http://www.cmv.com.tw/en/product.asp?pid={7D0F23D1-529E-4152-8FD9-E18B9FF7C33C}


CMV CT-720D Technical Specifications
---------------------------------------
Type : 17-inch active panel TFT display
Native Resolution : 1280x1024
Active Display Area : 338 x 270mm
Brightness : 450cd/m²
Contrast Ratio : 500:1
Response Time : 8ms
Dot Pitch : 0.264mm
Color Resolution : 16.7 million colors
Viewing Angle : 140° (V) x 160° (H)
Bandwidth : 135MHz
Analog : RGB Analog
Digital : DVI-D
Horizontal Frequency : 28~82KHz
Vertical Frequency : 50~76Hz
Power Consumption : 45W
Power Saving Mode : 3W
Physical Dimentions : 416(W) x 404(H) x 216(D) mm

Nice~~~~[:p]
But, I have another problem now.
I can't find a suitable driver of my monitor now.
Thw PnP mon. driver seen can set the resolution up to 1024x768..
Just 800x600...[xx(]
Anybody can give me a suitable driver for my monitor???
My mon. is "ComMon A720"(something like that, I can't recogize the model clearly)..
Always powered by:
CPU:Pentium III 500Mhz
RAM:256 RAM
Video card:
Voodoo 3 2000(8MB)
Driver:
AmigaMerlin V2.9  (9x/ME)
DirectX 9.0c
MesaFX-6.3(the lastest version)