3dfxzone.it ~ SFFT Drivers ~ MesaFX ~ 3D-Analyze ~ 3dfx Headlines ~ 3dfx Cards ~
Home | Profile | Register | Active Topics | Members | Search | GoogleSearch | FAQ | 3dfxzone.it
Username:
Password:
Save Password
Forgot your Password?

 Index
 3dfx Hardware & Software
 Voodoo2 Discussions
 Voodoo2 SLI
 New Topic  Reply to Topic
 Print topic

Author Previous Topic Topic Next Topic  

kazu
Novice

1 Posts

Posted - 02/07/2004 :  21:19:32  Show Profile  Visit kazu's Homepage  Reply with Quote
I have 2 Monster 3D II 8 MB and want to use them in sli mode. But it doesn't work
In single mode both work fine for themselves.
I noticed that on one card there stands Rev A and on the other Rev E
the on with rev a has an additional resistor on the board.. i soldered it out but that didn't change anything so i resoldered it again. its like this:
when i start game with sli mode enabled and the rev a card is the first then the screen simply switches to black no hangup... simply black screen. when i use the rev e card first the screen flickers the 3dfx logo in strange colors and then the screen turns black with some flickers sometime.
i already tried many drivers....
haven't tried the mismatched drivers jet.
are my cards damaged? or what could be the problem?
can u help me?

Rainbow
Novice

Russia
15 Posts

Posted - 03/07/2004 :  07:30:16  Show Profile  Visit Rainbow's Homepage  Reply with Quote
use mismatched driver.
I have Monster 2 (8 mb) and Astro PV830 (12 mb). I used FastVoodoo 4 XP GE and mismatched Glide 2x and 3x from mismatched sli driver for win9x (v3.02.02). works in win2k.

Voodoo5 5500 AGP with Special VGA BIOS Setup
Go to Top of Page

ArchAngelCD
Average

USA


228 Posts

Posted - 04/07/2004 :  06:05:38  Show Profile  Visit ArchAngelCD's Homepage  Send ArchAngelCD an ICQ Message  Reply with Quote
Did you try the both card alone again after you removed and then replaced the resistor? (You shouldn't have done that IMO)

It sounds like one of the cards is damaged from what you describe.
Do you have the SLI cable connecting the 2 cards?
Is the cable OK or might there be damage to the cable?

Your system specs, OS and driver version would help us too...

____________________________

Asus P4P800 i865PE | Intel 3.2 GHz P4C | 2048 Mb Kingston PC3200 Dual Channel DDR SRAM | 160 Gb Western Digital SATA HD | NEC ND-3520 16X DVD-RW | WinXP Pro SP2 | ATI Radeon X850 Pro | 6-channel AD1985 audio CODEC | 3Com 3C940 Gigabit LAN | Diamond Monster 3D II 24Mb SLI
Go to Top of Page

PanoramixDruida
Average

Argentina
152 Posts

Posted - 12/07/2004 :  13:42:12  Show Profile  Visit PanoramixDruida's Homepage  Send PanoramixDruida an ICQ Message  Reply with Quote
What I know is that you have to use two Voodoo2 from the same manufacturer, and with the same amount of RAM. So, you are ok. There's no problem with the revisions.

Maybe the passthru cable you're using is damaged. Or you didn't connect it OK. Anyways, it sounds like a hardware problem -maybe in both cards?-
When you use them one at a time, do you have the same problems?.
Go to Top of Page

perer
Average

Netherlands


243 Posts

Posted - 27/07/2004 :  08:46:31  Show Profile  Visit perer's Homepage  Reply with Quote
Could you scan does two cards for me???
Because I am looking for pictures and changes in different revisions.
I didn't even know they had revisions with the Monster3D2.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Print topic
Jump To:

 

Forum Rules

Legal Info

Privacy

Contact Us

3dfxzone.it

HWSetup.it

ForumZone.it

 

All trademarks used are properties of their respective owners - Forum Graphics and Contents 2001 - 2014 3dfxzone.it - Forum Engine Snitz Forums