How to update my voodoo5 bios?

Started by skypoem, 16 August 2003, 23:01:22

Previous topic - Next topic

skypoem

voodoo5 pci with dvi£¬ now its bios is ver1.11

i want to update to bios1.18 with dvi enable.

when i used flash program, it can't identify my v5's eprom.

how can i do for it?
 

ArchAngelCD

If you are trying to flash your BIOS from a DOS window within WinXP, it won't work. You have to boot your PC from a boot disk and then flash the BIOS.
____________________________

Asus P4P800 i865PE | Intel 3.2 GHz P4C | 2048 Mb Kingston PC3200 Dual Channel DDR SRAM | 160 Gb Western Digital SATA HD | NEC ND-3520 16X DVD-RW | WinXP Pro SP2 | ATI Radeon X850 Pro | 6-channel AD1985 audio CODEC | 3Com 3C940 Gigabit LAN | Diamond Monster 3D II 24Mb SLI

skypoem

I just do it in dos after reboot with a boot cd...

my maiboard is nforce2, perhaps...
 

ROTOR

if you have a little patience I say all the programs to you and what you must do for flash your BIOS.

and the steps one by one.
 

skypoem

thank you, rotor

can you tell me how to do?

i have the files, flash.exe,dos3gw.exe,pci-sd.rom, need more?
 

ArchAngelCD

You CAN NOT do the flash in a DOS window if you boot to WinXP. You will need to boot to DOS, Win95 or Win98. Ues a boot disk and then do the flash.
If you don't have a boot disk you can get and OS boot disk you want from here.
http://www.bootdisk.com/bootdisk.htm

Good luck.
____________________________

Asus P4P800 i865PE | Intel 3.2 GHz P4C | 2048 Mb Kingston PC3200 Dual Channel DDR SRAM | 160 Gb Western Digital SATA HD | NEC ND-3520 16X DVD-RW | WinXP Pro SP2 | ATI Radeon X850 Pro | 6-channel AD1985 audio CODEC | 3Com 3C940 Gigabit LAN | Diamond Monster 3D II 24Mb SLI

skypoem

i boot my pc with a boot disc...but it's not useful
 

ArchAngelCD

Where did you get your flash utility and BIOS file?
You might have an older flash utility.
To be sure, goto Stanto's site and get what you need there.
http://welcome.to/3dfxbios
Don't forget to read the FAQ section first because most questions are answered there.
____________________________

Asus P4P800 i865PE | Intel 3.2 GHz P4C | 2048 Mb Kingston PC3200 Dual Channel DDR SRAM | 160 Gb Western Digital SATA HD | NEC ND-3520 16X DVD-RW | WinXP Pro SP2 | ATI Radeon X850 Pro | 6-channel AD1985 audio CODEC | 3Com 3C940 Gigabit LAN | Diamond Monster 3D II 24Mb SLI

skypoem

i juse got bios file from this web and flash my bios according the FAQ, and failed.
 

Nightbird

a question : your card, is it a Mac version ?


__________________________________________________

Voodoo Woman
__________________________________________________



______________________________________________

In-ter-ac-tive :
The way video games were always meant to be played
______________________________________________

Welcome to 3dfxzone.it Community
_____________________________

skypoem

perhaps it's a mac version card, but it works well in windows xp.
and the version of bios is 1.11
 

InSomNiaN

"i want to update to bios1.18 with dvi enable"
Cannot do that. 1.18 bios is only for the AGP cards.

"when i used flash program, it can't identify my v5's eprom."
Most likely because u r using an AGP bios update on a pci card


AFAIK only the mac V5 had a DVI output......which u could do a bios flash to work on pc.

:)

**Life is not measured by the number of breaths we take, but by the moments that take our breath away.**
***ASCII stupid question, get a stupid ANSI!***

skypoem

the 1.18 bios with digital output can be used on pci card...

 

ROTOR

in the page http://welcome.to/3dfxbios it tell how to update your bios if you don´t undertand it.

1º you have a boot disk (Windows 98 SE).

2º you have a flash utility "dos4gw.exe" & the Bios file in other disk.

3º Reboot & insert the boot disk, choose" no cd compatibility" & wait to it finish

4º copy the flash utility & the bios file to Ramdisk,

5º execute the bios utility & flash your bios , wait about 20-30 seconts to finish.

6º reboot.

I believe that that is everything