Diablo II on a voodoo2

Started by 3dfxFanatic, 01 November 2003, 22:11:54

Previous topic - Next topic

3dfxFanatic

i installed diablo2 on my secondary rig (p2 350Mhz,ati mach64+ voodoo2 sli, OS: win2k) , and it wont recognize the voodoo and doesnt let me use the glide renderer.
how can i make it work?
 

amp_man

have you tried fastvoodoo2 3.5? do you have all the SLI and monitor cables hooked up? is the "Assign IRQ to PCI VGA" enabled in the BIOS, if you have such an option? are either of the V2s sharing an IRQ? so many possibilities...

When the sun goes down, the music turns up...

Windows XP Pro|Athlon XP 1800+|Voodoo 5 5500 AGP|MSI K7T266-A|768MB DDR 2700 RAM|SonicEdge 5.1 Sound Card

3dfxFanatic

i have the fv3.5 :D
the sli and monitor cables are fine, and i'll need to check that irq issue...
 

74p54

Quote3DFX Voodoo 2

Problem: I don't seem to have a "glide" option listed as an available mode in Diablo II.
Solution: This is caused by a corrupt or improper install of the latest 3dfx Glide Drivers for the Voodoo2 card. Uninstall your current glide drivers, delete any .ini files in the c:\windows\inf\other\ folder which pertain to 3dfx and reboot. Upon starting up it will prompt you for drivers for the new device, point to the latest drivers you downloaded.

Source: http://www.voodoofiles.com/helpdiablo.asp

 

3dfxFanatic

i've already read that, and i tried it, but there wasnt a problem with the driver installation...
 

Nightbird

QuoteV2s sharing an IRQ

the V2 doesn't need an IRQ to function

but with our modern mobo's, i will avoid to install a Voodoo2 on the first slot pci (near the Agp Slot) since this Agp Slot shares often an IRQ with it

anyway the problem seems different with Diablo2
do you try other games in Glide ?



__________________________________________________

Network powered by 3Dfx and AMD
__________________________________________________

______________________________________________

In-ter-ac-tive :
The way video games were always meant to be played
______________________________________________

Welcome to 3dfxzone.it Community
_____________________________

3dfxFanatic

yes, im using glide to play ut and it works great, except the bottleneck problem with the cpu...
 

batracio

Quotethe V2 doesn't need an IRQ to function

but with our modern mobo's, i will avoid to install a Voodoo2 on the first slot pci (near the Agp Slot) since this Agp Slot shares often an IRQ with it

I don't understand the reasoning. If the V2 doesn't use an IRQ, the best PCI slot would be the closest to AGP, because you save an IRQ and this setup can't cause a conflict (only AGP card will be using IRQ, V2 won't).
Why make trillions when we could make... billions?

Nightbird

@3dfxfanatic

Diablo2 uses Glide3 ?
so you can perhaps try to change this file : back up your file (glide3x.dll.bak), d/l an 3dfx driver for the V2 and extract the old glide3.dll

When Diablo2 went out, Blizzard mentionned that the driver 3.03.00 was the best for the game



__________________________________________________

Network powered by 3Dfx and AMD
__________________________________________________

______________________________________________

In-ter-ac-tive :
The way video games were always meant to be played
______________________________________________

Welcome to 3dfxzone.it Community
_____________________________