Sugestions for VooDoo based projects

Started by hanksemenec, 16 August 2003, 04:41:19

Previous topic - Next topic

amp_man

*yawn* this is getting too old. the opengl posts were earlier in the thread, like pages 1 and 2. and yes black out you are right about the dx stuff, i wasnt trying to argue with you. im going to sleep now, and dreaming of when my new 9500 comes in so i can ditch this place *zzz*
When the sun goes down, the music turns up...

Windows XP Pro|Athlon XP 1800+|Voodoo 5 5500 AGP|MSI K7T266-A|768MB DDR 2700 RAM|SonicEdge 5.1 Sound Card

Black_Out

Hee hee hee...the 9500 will definately solve the problem.

I wasn't arguing with you - sorry if it sounded like was directing it at you - I was directing it at lecream and q-wrapper or whatever the name was.

--------------------------------------------------
"Shop smart.........shop S-MART.....YA GOT THAT?!!"
-Ash from Army of darkness
--------------------------------------------------
"Shop smart.........shop S-MART.....YA GOT THAT?!!"
-Ash from Army of darkness

Knuckles

#77
This is getting  too much off-topic. please get back to the main topic discution.

About that, how are going stuffs Hank?
 

Hiero

At x3dfxgamers.de a guy already equipped a Voodoo5 5500 with 128MB of 5ns ram. It runs with 200MHz and has about 15 frames more than the
normal V5 in some applications. ( We called it Voodoo 5800 ;) )
It's still being tested....

And 1,5V support could be done through a AGP to AGP converter. ( ??? )
The only thing you need is a Motherboard with agp and a graphics card ( you better take a Geforce cause you need to cut the agp off )
connect the agp part from the graphics card with the agp slot and convert te voltage from 3.3 to 1.5... No idea if that would work...

The Best thing would probably be to enable a SLI of Voodoo5 cards.
So you could take 4 Voodoo5 PCI for example. I asked for that at Voodooalert but everybody said it would have to be done in Hardware.

That may be still possible but how can 2 AGP cards be connected in SLI ? Or an AGP to dual AGP converter ?



< We`ll change the face of 3D graphics... again > 3dfx
< We`ll change the face of 3D graphics... again > 3dfx

mcmagostini

hi all,
that's my fisrt post here.

I actually think v5 SLI would be more practical.

greetings,
mcmagostini
AmigaMerlin / SFFT / MesaFX
Sempron64 3000+, 512MB DDR400 2,5-3-3-11
Voodoo5 5500 PCI (Rev 3100)
ASUS K8N4-E

Rolo01

@ Hiero

Are you sure that story about a V5-5500 with 128MB Ram is true ?
There was lots of trouble lately at x3dfxgamers so I dont know what to believe, especially when dealing with Gulli...
Where did he get the memory, which kind was it ?
 

bloodworm

Hank,

My picks are

1. 4X (really just 1.5V at 2x would work for me) first.  been thinking about upgrading my system, but I am an Intel head from way back and don't have a PCI v5.  We could just buy a level conversion kit that would work in the AGP slot, but the ones that I have run across have been very expensive $$$.

2. more memory (and faster too).  I have a guy here in the lab that can do the mods for me.  I know what part to use, but don't have a source for the ram chips.  also, what else needs to be done to the board to make the VSA-100's see the extra ram?  I know that the BIOS is already ready for the 64Mb per chip (hehe) and that you have already done some of the legwork for the mods here.

I didn't realize that there was power on the inside planes of the V5 where the slot should be,  good thing I did'nt go a cuttin yet.  What is the part Number and source for the AGP adapter that you found?  And what other signals are you concerned about that may be out of voltage spec that I can research for you here?
Bloody Mess

beta

QuoteOriginally posted by Black_OutFact: Voodoo 5 - 64MB total memory - shared between both TMUs, capable of texture compression.

I believe you are confused, the single VSA-100 chip has 2 texture unit's, the Voodoo 5 is simply 2 VSA-100's in SLI on a single PCB, this is 4 TMU's in total.

And still the 1.5V/3.3V signalling confuses.  The SLI AGP 'Napalm' config will not allow true AGP operation.  This is dictated by the Intel AGP 1.0 specification.  Where the master chip cannot be assigned the card defaults into PCI 66 mode.  I will not run in 4x AGP or even 2x AGP.  And all this is largely pointless as execute mode is unsupported as has already been said.  Any signalling voltage modification would be purely for compatibility reasons, not to make the card miraculously go into 4x AGP DIME transfer.

The Voodoo 5 5500 AGP was mounted on the 3.3V AGP 1.0 spec PCB for this very reason, 3dfx shipped it without the bridge controller and knew full well it would only run as a PCI 66 device, so why bother with a 1.5V/3.3V AGP 2.0 (1x, 2x, 4x) Universal PCB like that of the Voodoo4, it would never run as 2x let alone 4x... so as a result they did not.

Also note: In 3dfx tools (or your frontend) you can set the AGP mode to ('SSTH3_AGP_XRATE') 2x rate but it does nothing.

V5 5500 & V4 4500 sys' ~ Mandrake Linux 9.1
 

bloodworm

Yes, the card will still run in the 1x/2x mode (who cares what speed since the card doesn't even use the AGP features), but all we really want to do is stick the card in a REAL Intel motherboard (not some crappy clone) and see what a Pentium IV enabled V5 5500 AGP will do...... I suppose we could fork out the big bucks and just buy a real Intel server type motherboard with one or two PCI66 slots and go out and buy an overpriced V5 5500 PCI, but really, who wants to spend any more money just to run a V5 PCI card?
Bloody Mess

Cyberpunk 2027

Hiya Lecram i'm 1 of those n00bs you mentioned b4 just a quick lesson in life just bcoz you haven't posted b4 does NOT mean that you know nothing..:D
I've been playing with and into computers since 1979 with my Vic 20 and a datasette..
So please will you leave the topic alone and post meaningful post's..

Sorry all for that but i have just read the whole thread from start and i have to say bravo Hank you are indeed a techno god...
All Hail.. :):):)
I own 2 voodoo 2's an 8mb and a 12mb and they are working just fine in a IBM Aptiva K6-2-400 with 512mb ram
I also own a Banshee 16mb Ref card that lives in my mum inlaw's pII 300 with 256mb ram
I also own a Voodoo 5 5500 that lives in my GF's AMD 2000+ with 256mb PC2700
Sadly i can't use my V5 in my system due to the AGP slot not supporting it.. (1.5/3.3 debate and all that)
I also plan to Get my hands on a Voodoo 5 6000 soon..
My main concern is can you just piggyback the same type of Hyundai 5ns SDram or is there something blocking that from being done...
Please excuse my rambles...


Those who fail to learn the lessons of history are doomed to repeat them...

Athlon XP 2000+@2088mhz 2xWDJB 80gig hdd's 512mb PC2700 GF4 Ti4200 (running modded bios by me)
K7N2-Delta-ILSR (running an experimental bios)
Lian li PC-60 case with all PC Smart case fan 2's running flatout.
TT 420watt PS
Those who fail to learn the lessons of history are doomed to repeat them...

Athlon XP 2000+@2088mhz
TT Volcano Extreme 12
2xWDJB 80gig hdd's
Kingmax PC3200 2x256mb (dual channel)
GF4 Ti4200 8x 128mb
K7N2-Delta-ILSR nforce 2
Pioneer 105 DVD-R/RW
Logitech 5.1 speakers
Lian li PC-60 case with all Smart case fan 2's..
TT 420watt PS

Voodoo List...
Stingray 128 w/Voodoo Rush 2mb
Voodoo 2 8mb
Voodoo 2 12mb
Voodoo Banshee 16mb agp
Voodoo 5 5500 64mb agp

PhoZy

huank,after hearing abt implementing 128meg of ram on the voodoo 5500,if it is possible,wat sort of memory modules could be use and can we use ddr memory modules on it?And as for 2xVoodoo 5500,i think that would not very feasible as these cards would be very hard to find now adays.
 

Hiero

In general the VSA-100 does support 64MB of memory, so a Voodoo5 5500 would support 128MB. You can't upgrade with DDR memory, the first chip to support DDR memory was the VSA-101 which you can usally find only on Daytona cards. (Very rare) Only normal SD-ram could be taken and it has to be the same design as the old memory. The best SD memory in this design has about 4 ns and would allow 250MHz instead of the 166MHz of the normal 6 ns.
The difficulty is to get such memory with a size of 16MB per Chip.
(8 x 16 = 128) They are rare and companys who sell them are only interessted in selling a big amount.
The last thing would be the bios which would have to be changed. Maybe the memory size must be changed (as far as I know even the bios does support 128MB ram) but at least the ns should be changed, so that the Voodoo can take a bigger advantage.


< We`ll change the face of 3D graphics... again > 3dfx
< We`ll change the face of 3D graphics... again > 3dfx

NitroX infinity

What about SGRAM? Wouldn't it be possible to implement that?
 

Hiero

Yes indeed. If you sacrifice a Voodoo5 5000 AGP or PCI you could equip the card with sg ram as it is another memory layout. And I think you can't get sg-ram which has that less ns as 4ns sd-ram has. Why should anyone take sg-ram ? There is nearly no difference in the performance.


< We`ll change the face of 3D graphics... again > 3dfx
< We`ll change the face of 3D graphics... again > 3dfx

lecram25

QuoteHiya Lecram i'm 1 of those n00bs you mentioned b4 just a quick lesson in life just bcoz you haven't posted b4 does NOT mean that you know nothing..
I've been playing with and into computers since 1979 with my Vic 20 and a datasette..
So please will you leave the topic alone and post meaningful post's..

n00b? I never called you a n00b. lol...I was talking about amp_man and BlacK_Out/cpdubal...

Since 1979??? lmfao...you're 13yrs old!!! Might wanna recheck your profile...

| AMD Athlon XP (Barton) 2800+ @ 3200+ (11x200) | Cooler Master Jet 7 | ABIT NF7-S Rev 2.0 (nForce 2) | Corsair TWINX1024-3200C2 | Sapphire ATi Radeon 9500np>9700np | Sound Blaster Live! X-Gamer 5.1 | 3dfx VoodooTV 200 PCI | Western Digital 40GB & 120GB HDD | Pioneer 106s DVD | LG 52x24x52 CDRW | Cambridge Soundworks Desktop Theater 5.1 DTT3500 Digital Speakers |