Hello there,
I´ve tried to use the Amigasport driver on my Voodoo3 3500 TV card, everything seems to be alright but i cannot watch tv. Keeps showing me a green screen ( look like no signal ) but it´s conected to the antenna.
HELP ! I´m using Win XP Pro
[]´s
TauiL

It might be worth trying a test using a VCR as input to the pod, to see if you can get a video display on the PC, you could also try connecting the pod outputs to the TV. I tried this setup using VisualReality software under Win2k, using the TV card driver off Amigersport, but with the SFFT Alpha 22 driver installed over the Amigersport driver. The above test worked with sound and video output both on the computer and the TV. I needed to enable TV out to get a picture on the TV, and I had a lot of distortion on the sound on the PC. If you can't get at least this setup to work then you may have some software issues. The test was using UK PAL video settings. I don't have an aerial handy so I can't test the tuner, it just output snow on the tuner option, which seems consistent with no aerial. The SVideo and composite inputs both worked.

SFFT

Ok, I´ll try.
But where can i get this SFFT Alpha 22 driver ?
[]´s
TauiL

There should be a link to the driver zip files from this sites homepage. There are separate zips for the V3 and V4/5 cards.

SFFT

Easier to give the link to the SFFT Driver Alpha 22 - 3dfx Voodoo3/4/5 - Windows 2000/XP  
https://www.3dfxzone.it/news/reader.php?objid=594