With regard to the message about my SLI, it is working fine under XP without the need for mismatch drivers, as can reach 1024 x 720 in both quake 2 and quake 3 (quake 3 is unbelievably good using wicked 3dfx!!) V good fps and no lag! Get in!

However back to the topic of getting Counterstrike condition zero to work, i was advised that both either V2_mesafx_xp or Wicked 3dfx would definately work however this is not the case.  With Wicked 3dfx it has a limited option of games it can sort for you (this is how i fixed q3 with no probs whatsoever) however Counterstrike is there but condition zero is not and as i cannot modify what it searches for i says ut cannot detect what it is trying to find.  Also V2_mesa_fx just requires me to point it to the Condition zero folder and then it places the opengl32.dll driver file into the directory.  I thort all was good, ran the game and tried to select opengl at both 800x600 and 1024 x 720 however when it tries to reload in this mode i can see my windows toolbar over the top of the game image and eventually get an error report saying:

AppName: czero.exe    AppVer: 1.0.0.0    ModName: unknown
ModVer: 0.0.0.0    Offset: 61ff5430

Basically it crashes, ive tried all combinations of ways to do this, even tried to load the game then extract the file and change whilst the game is running then try to change the mode (all to no avail) and also it will then crash every time unless the driver file is removed from the cscz folder.

Anyone got any ideas/suggestions as to how i can get condition zero to recognize my voodo2 sli and get it to work ..coz i know it has the POWER!!! especially from what ive seen with q3!!

Cheers ps47,

Installed the tweaker and managed to get 1027 x 720 in q2, bit strange tho if i do change brightness or anything it gives me black screen but if i ctrl+alt+del and then click on q2 to get back to game it runs fine, just trying to sort it to play cs condition zero at the mo as not yet working with that. Thanks a lot anyway dude..

Right can get 800 x 600 to work by adjusting brightness levels but 1027 x 720 will not work, get sound but black screen

Actually seems if i set brightness higher it works! have yet to try 1027 x 720 also i set my monito refresh rtate to 60 to agree with the voodoo, dunno if that helped or not.  Im just gonna try all setup configs to see if its 'really' working! )

Thanks again mate,

Were getting somewhere, swapped the glide driver for the one you gave me and i can now select 1027 x 720 or 800 x 600 but it runs (can hear sound) but with black screen! :OD

Dash, heard bout this before. do i need to swap pci positions or change card that has cables coming out of it?

>When you say "the default 3dfx control panel doesn't work (and show information) correctly under XP,its already mentioned in that FAQ I linked.this is normal,and can be ignored" does that mean that SLI may well be working but it wont tell me if it is or not???

This has now become my life mission! Was spozed to be going out tonight but cant be beaten by this :oP

Sorry to tax your knowledge!

Also i just tried to update the glide 2x drivers from the one stated above to koolsmoky's latest and it caused q2 to crash so am reverting back to original driver above but still in the dark as to what to do here.  Also tried to check the AGP settings in the BIOS but couldnt find them there to check if they were below 128mb.

Arrrgh 2 much for the mind! please help if anyone has any idea where im going wrong!

Actually just realised it can change to 800 x 600 in q2 with D3d OPENGL but when i try to run a game get the same grTexDownloadMipMap : mipmap cannot span 2 Mbyte boundary error

its odd as can tell from the look of the console that 3dfx are enabled at that point

do i need to use that koolsmoky voodoo2 XP driver?/?

so very confused! )

Cheers dude,

Just after i posted that one i managed to get the single voodoo2 working with quake 2, obviously only up to 800x600 (forgot to install the opengl driver - n00b!)

Now ive inserted the other one but on display advanced tab says SLI 'not detected'
And fxmemmap vxd version: not present

and my glide 2x version is at 1.00.01.0106 -is that good enough?

I get a mipmap eror something like 'grTexDownloadMipMap: mipmap cannot span 2 Mbyte boundary error when trying to run q2 in 1027 X 720

and now q2 crashes coz its trying to revert to that mode...hmmm can i sort that back to 800x600?

Cheers for the quick reply....

Hi Guys!
Ahhh getting a massive headache now so im reverting to the forums!

Been looking through this site whilst trying to sort the problems ive been having and it seem's there's very little you dont know how to fix!

To begin with im basically trying to install my two old voodoo's onto my flat mates pc (running XP) at uni so we can have some oldschool fragging action!

The two cards im using have DEFINATELY worked in sli in the past on my old win 95/98 systems, one is definately an orchid richeous and the other (i think) is a Monster 3D (from what i can remember from the box cover) -since lost original cd's etc.. (i think they both have max onboard RAM aswell, is that 8? bah cant remember)

However the main problem is that no matter what driver's i use, be it the original win 95/98 drivers, the 1,050kb Win2k/XP drivers or the fast Vodoo2 4.0 XP drivers it just simply doesnt seem to work even tho it seems to be installed fine.

The sytem spec for the pc im trying to install them onto is as follows:

Intel Celeron Processor, 996MHz (1)
256MB RAM
Windows XP (service pack 1)

DISPLAY ADAPTER : Intel(r) 82810 GRaphics Controller

There are some other current issues i have with that pc (i think due to the removal of service pack 2 -evil!) which may be affecting this issue.

At present i have the following devices being flagged up as needing drivers installed under device manager (in unknown devices section):

(i)Intel AIM flat pannel driver 5
(i)Intel AIM flat pannel driver 6
(i)Intel AIM flat pannel driver 7
(i)Intel AIM TV Encoder thingymygig driver 5

Im sure these have something to do with display but the sytem works fine without them it seems.

At the moment ive taken one of the voodoo's out as i thort if i can get one working then i may have more chance with 2 but nope, no joy!

So! ive got one installed, running the fast voodoo 2 drivers, leads seem to be in right position (small cable running from voodoo into display adapter and monitor plugged into voodoo)however under device manager it says device IS working properly but NO resources are being used coz it has a "problem" hahahahha! god damn it!

Im using quake 2 (unsure if need any updates to make this work coz didnt in the past) to test if it works each time (i try all options available in video settings) and the best i can get appart from crashes back to software is a multicoloured pixilated display still in software (which i seem to recall from when i first installed my voodoo2 all those years ago! <sigh>)

However also when i did have both voodoo's set up on the xp pc using fast voodoo drivers 4.0
on the advanced display tab it stated that sli was 'not detected' and the words didnt fit properly into the info box- odd (but again seem to recall that from past).

I cant think of any other information that would be usefull at the moment but if needed i will provide any information if guided on how to do so!

-the tab i have under advanced display options is headed 3dfx V2-1000 with only glide options -unsure what/if to change here.  I also have a Voodoo2 OC tab (which came with fast voodoo2 4.0 i think) but again i have not touched any of these setting through fear of melting the cards/pc!

Please if anyone can help id really appreciate it and once it is working (if only :p) im interested in how much i can overclock/tweak these wee beasts to get max performance (i.e wanna see if can get quake 3 working)

Thanks in anticipation of your soonest reply!

Gordon...

(oh and by the way ive installed direct x 9c on the pc with issues)