Coming soon, for sale
a voodoo 3-3000
2 blackmagic voodoo 2's from stb
an original card from orchid - the first voodoo iteration
3 128-3d voodoo 2 boards with the pro-motion aliance 2d chipset.
a voodoo 5-5500 board
a 2600 voodoo 5-6000 board.
a voodoo volts power unit (if I can find it)
hmm if you claim to have a 3dfx Voodoo5 6000 AGP 128MB rev.A2 2600 + Legacy Voodoo Volts could you post some pictures of it?
If youa re still the owner what country do you come from? So i can add you to my Voodoo5 6000 World owner lists and afterwards edit your name with that of the new owner.
Peace.
http://picasaweb.google.com/lh/sredir?uname=114688480094930960522&target=ALBUM&id=5485845234375518865&authkey=Gv1sRgCOqeiKyOhu6DIQ&feat=email
You may add my name to the list, however, I may be posting this for sale.
QuoteOriginally posted by Keatah
http://picasaweb.google.com/lh/sredir?uname=114688480094930960522&target=ALBUM&id=5485845234375518865&authkey=Gv1sRgCOqeiKyOhu6DIQ&feat=email
You may add my name to the list, however, I may be posting this for sale. I am in the usa..
ahh nice pics, I will some information from you and the card, that are these:
1.) Is it Functional?
2.) Is it Defect?
3.) what Voodoo Volts does it come with:
from left to right:
Large Legacy Voodoo Volts - Small Legacy Voodoo Volts - Late Voodoo Volts
(http://www.3dfx.ch/gallery/d/29051-1/proto_v6k_bricks.jpg)
4.) What country are you from, need this to add a flag for your country [8D]
Very interesting to meet another V6K holder, nice E-tag too man, did you work for 3dfx or did you get this card from Clay Woodson< Some history of the card would be interesting as well.
If you like, you can view my lists and my research over here:
http://www.x-3dfx.com/groups/discussion/forum/topic/the-world-voodoo5-5000-6000-lists-info/
3dfxzone.it @ x-3dfx .Yuku are linked from that place as well, if you need to ask anything feel free to do so and I also invite you to x-3dfx.com ;)
Peace man and great to ahve met another unknown Voodoo5 6000 Holder.
It *might* have come from clay woodson, that was years ago that I acquired it on a whim. I didn't work for 3dfx. I am just an avid pc hardware buff. I would need to dig thorough emails. I do not know if it working or not. I don't have a motherboard that is compatible with it. In fact, the bx board I have from abit is listed as incompatible!
The voodoo volts, which I have not dug out yet, would be one of the smaller ones. I don't know which one, except it isn't the large one. It is probably the one with the round impression on it. Though that would seem incompatible with the 4-pin connector on the board..??
The two smaller voodoo volts power supplies are, what I hear, pretty much standard units and not specific to 3dfx cards. I *might* have a box of those. I need to go through an extensive locker full of this stuff.
I can help you config a safe 3dfx test setup, my mobo listys shows enough choices for stable runtimes, the EPoX EP-8K3A setries are the best motherboards for all V6K Revisions btw.
All I need to know is what country are you located at, this shows others that read my lists where this card is located ;)
So al I need now is your country [8D] I think USA but hey I may be mistaken :)
yes USA, let me see about getting an epox board then.
QuoteOriginally posted by Keatah
yes USA, let me see about getting an epox board then.
Ahh cools :) the 8K3A+ is the best one, this one has a Code 80 Debug Computer and a raid controller, this is also the most successful motherboard tested with all Voodoo5 6000 revisions.
CPU has to be a 266 or 333 Mhz FSB'ed variant of the AthlonXP my advice is look for an AthlonXP 2600+ and up, the 3200+ FSB 333 is the best CPU for this motherboard, these ryun 2332Mhz default, hereby as being the fastest AthlonXP's around, the 8K3A+ also supports AthlonMP CPU's but no ECC Reg memory as only down side.
As ram goes just use Corsair XMS Platinum or Kingstin Hyper-X PC-3200 this is good ram that also is backwards complaint with PC-2700 aka DDR-333.
Need any help, feel free to ask away [8D]
QuoteOriginally posted by Keatah
yes USA, let me see about getting an epox board then.
you got an email mate, I found you something ;)
QuoteOriginally posted by Keatah
yes USA, let me see about getting an epox board then.
Hey Keatah, did you come accross the VoodooVolts yet?
if so Let me know asap.
I have not looked through everything yet, I hope to do so soon as I'm looking for a bunch of other stuff too.
ah oke please let me know via email when you have found them :)