Print Page - Voodoo3 1000 or Voodoo Velocity 200

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: corn on 17 December 2003, 23:35:53

Hi guys:

I do not know if my graphics card is a Voodoo3 1000 or Voodoo Velocity 200.
It has:

16MB SGRAM
125MHz Core Clock Speed
5 Million Triangles/sec
250 Megatexels/sec.
Supports resolutions up to 2048x1536
Full 128-Bit 2D accelerator
300 MHz RAMDAC
DVD Hardware Assist
Supports DirectX, Glide and OpenGL
Alpha-Blending
Single Pass, Single Cycle Bump Mapping
Single Pass, Single Cycle Trilinear MIP-Mapping
Patented Multi-Texturing Programable Fog Tables
Sub-Pixel and Sub-Texel Correction
Gouraud Shading

Can you help me??

http://groups.msn.com/_Secure/0XwDWAi0aCLFE6L5nPQtVIOSOADKW45AH1AdA2YsvwLDwKKAAyPYYnbpvapo4So6Fy6sVcGYHzNDpgJoUZ4oUp9nKJz8ved8I*bQsg91E0fxGPHMcweOrkEMURPX1pAR2vvMp6DVXTKU/Voodoo3%201000%2016%20Mb%20AGP%202X.jpg?dc=4675450222213285453

My Best Regards:
corn

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: amp_man on 18 December 2003, 20:54:07

I believe this is a Voodoo Banshee

https://www.3dfxzone.it/dir/3dfx/prodotti/vbanshee.htm

Although the specs are a little different.

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: corn on 18 December 2003, 23:23:35

Hi:

A banshee, Are you sure? My graphics card run 125 Mhz (Core/memory), And the banshee just run 100 Mhz (core/memory). How can I know what kind is it?

Help

Athlon XP 1800+
Placa ECS con SIS 735
768 MB RAM PC2100
40 Gb 5400 RPM
Powered by Voodoo5 6000
Sound Blaster 5.1
Grabadora Yamaha 426 de 1998

Mis tarjetas 3DFX // My 3DFX card
http://groups.msn.com/3dfxpower/resultados3dmark2000.msnw?albumlist=2
"In this place all think voodoo ... if you aren't a voodoo user this is not the right place for you, simple and plain." -AmigaMerlin

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: Nightbird on 19 December 2003, 20:10:38

sure, this is not a Banshee ;)

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: amp_man on 19 December 2003, 21:08:49

Yes, it's definately not a banshee...i tried editing my post, but for some reason it didn't go through, and I didn't have time to try again. My best guess would be the STB Velocity, because the specs are the same/better than the v3 2000, which wouldn't make sense if it was a 1000.

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: Obi-Wan Kenobi on 20 December 2003, 02:49:41

Hmm I know this card, congrats! Youçe just recieved a 3dfx Velocity 200 AGP 16MB aka Voodoo3 200 AGP 16 core/mem @ 125Mhz insead of core/Mem 143Mhz like the original Voodoo3 2000's are. ;)

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: corn on 20 December 2003, 16:03:23

hi everyone:

I am glad to have a Voodoo Velocity 200:). As far as I know This graphics card is very difficult to find, isn´t it?

The Voodoo Velocity 200 is equal that a Voodoo3 1000 or not.

best Regards

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: Obi-Wan Kenobi on 21 December 2003, 00:45:08

QuoteOriginally posted by corn

hi everyone:

I am glad to have a Voodoo Velocity 200:). As far as I know This graphics card is very difficult to find, isn´t it?

The Voodoo Velocity 200 is equal that a Voodoo3 1000 or not.

best Regards

Well like i reqeusted earlier, The 3dfx Velocity 200 is nothing more than a 3dfx Voodoo3 2000 Low Profile , because the core/mem of the Velocity 200 run at 125Mhz and the original Voodoo3 2000's core/mem run at 143Mhz instead, that is actually the logical difference and for the Voodoo3 1000, he he that is the Velocity 100 it only has 8MB SGRAM and the Velocity 200 [the one you have of course ;)] has 16MB SGRAM, but the core/mem speeds are equal, 125Mhz.

I hope that cleared things up :)

Title: Voodoo3 1000 or Voodoo Velocity 200
Post by: corn on 21 December 2003, 19:05:51

Hi:

Thank you very much for all.

Best Regards

corn

3dfxzone.it WorldWide Community

3dfx Hardware & Software => General Discussions => Topic started by: corn on 17 December 2003, 23:35:53