*********************************
*	EDIT > WORD WRAP 	*
*********************************

EXPRESS WARNING:
THESE DRIVERS CARRY NO GUARANTEES, PROMISES, OR PERSONAL GAIN ATTEMPTS.

THESE DRIVERS ARE FOR EXPERIMENTAL / TESTING PURPOSES ONLY.

THE STAFF AT NuAngel.net DOES NOT CLAIM RESPONSIBILITY FOR WRITING, DEVELOPING, OR SURFACING THESE DRIVERS.  THEY APPEAR TO BE VOODOO 5 6000 BETA DRIVERS, BUT PLEASE NOTE THAT BY ENABLING 8X FSAA, YOU ARE NOT GOING TO ACHIEVE THE 8X FEATURES, AS YOU DO NOT HAVE THE HARDWARE TO BACK THIS UP.

HSR AND GUARDBAND CLIPPING ARE SAID TO BE SUPPORTED IN THIS RELEASE.

THE SOURCE OF THESE DRIVERS CANNOT BE CONFIRMED, NOR CAN THE OVERALL RELIABILITY.  DRIVERS ARE TESTED BY STAFF PRIOR TO RELEASE ON THE WEBSITE, AND FOUND INSTALLABLE AND FUNCTIONING AT THE VERY LEAST.  FURTHER RESULTS ARE TO BE DETERMINED BY INDIVIDUAL USERS AND THEIR FEEDBACK, WHICH CAN BE SENT TO THE E-MAIL ADDRESS BELOW.

IF YOU LOAD THESE DRIVERS ON, AND FIND THEM TO BE OF POOR QUALITY, YOU CAN DOWNLOAD 3dfx DRIVERS FROM:

http://www.EFA11.com

THOUGH AS FAR AS I KNOW NONE OF MY STAFF, NOR MYSELF, HAVE CREATED OR EDITED THIS DRIVERS IN ANY WAY.  HOWEVER, THOUGH THEY APPEAR TO BE EXCLUSIVLY ISSUED TO MY SITE, I WILL BEGIN LABELING THESE DRIVERS AS "n" VERSION NUMBERS.  "n" STANDING FOR NuAngel.net.

THIS DRIVER VERSION:
V5n1.2.00

Any notes or comments about these drivers may be sent to:
NuAngel@NuAngel.net


VoodooSource.net Voodoo4/5/6 Series Driver Set (Beta8)
***********************************************
This driver set was compiled by someone 3dfx and the INF modified by Wipeout using a lot of the settings and information that Nautis provided in the past.
This set of drivers is only for Voodoo4/5 cards and only for Win9x/Me.


-
Note:
THESE DRIVERS ARE NOT SUPPORTED BY 3DFX AND YOU USE THEM AT YOUR OWN RISK.  I CANNOT BE HELD RESPONSIBLE FOR ANY EFFECTS THEY HAVE ON YOUR 
COMPUTER.
-

File Versions:
These drivers are for the V5 6000 that was never released.

Voodoo4/5(tm) Driver Kit Version: 1.04.01
VSA 100® Series Win9x 2D/3D Display Driver: 4.12.01.0666 
Voodoo4/5 OpenGL 1.1 Client Driver Version: 1.0.0.0761 ICD 
Voodoo4/5 Glide(tm) 2.X Driver: 2.61.00.0658
Voodoo4/5 Glide 3.X Driver: 3.10.00.0658
INF Version 1.5 by Wipeout

-
HSR = Hidden Surface Removal now install automagically (Thanks to Dave over at Dave's hardware http://www.deathwish2000.sprite-network.com for the how to on this one).
The basic concept behind HSR is fairly self explanatory from the name – What can’t be seen shouldn’t be rendered. 
This can of course greatly improve performance as the video card no longer renders objects which aren’t visible (Every video card around still
renders a lot more than what is actually visible). Although HSR is not performed by the graphics card, rather by the 
CPU (Or T&L unit potentially if available, although this is unavailable on the Voodoo 4/5). As a result performance gains from HSR are largely 
CPU dependant. Currently HSR exists in BETA form, so many of the graphical errors or other workarounds mentioned here will 
inevitably become redundant as 3dfx fixes & optimizes the implementation. Furthermore HSR is a tricky thing and requires optimizations for it
to work with different games."
-

-
Guard Band Clipping is actually a hardware feature supported in the V5 but it has been unavailable until now.  All I know at this point is that if 
it is enabled it crashes most of my games.  In time I am sure the kinks will be worked out of this and it will lead to further 
performance increases.
-

The overclocking tab is not automatic.  The .exe file that enables it is included in the zip.  Just run this to enable your overclocking tab
if you so desire if not then I have provided the VSync disabling method in the regular advanced features so there is always access to it.

-
Analog SLI appears to be a different hardware mode but has some weird effects.
Enabling it will cause colors to be brighter and richer but will also cause very bright colors to bleed.  Also there is some jittering in some
2D menu screens on many games and it also makes things a little fuzzier using FSAA with it enabled so this setting works best with older games 
in higher resolutions (1024x768 and above).  Yields some very interesting results some will probably like it, some won't.  I prefer it disabled 
but the option is there for you to play with if you so desire.  The performance is identical in either mode so there is no advantage there.

-
The 2MB Texture limit setting for old glide games is now back in place and should help resolve some crashes some folks have been having with 
these games and V4/5.
-


Installation:

Note: These instructions are assuming that you already have the latest drivers installed. If not then go get the dammit!!  

--http://www.voodoosource.net/3dfx/drivers.html--    

this will give you a link to the latest beta drivers.

1.) Unzip The Drivers to a folder

2.) Open Control Panel

3.) Open Display
    
   a) Choose Settings

   b) Advanced

   c) Adapter

   d) Change

   e) Next->, Then Choose Display A List Of All The Drivers......
   
   f) Next->, Have Disk , Browse (Locate Where You Unzipped The Drivers To), Click Ok
   
   g) Choose Voodoo Series, Next-> (Ignore warning from Windows if one appears)

   h) Next->, Finished

4.) Reboot, (Finished)



Have fun!

-Wipeout

Email comments to Wipeout at wipeout@voodoosource.net 
Official home for the unofficial drivers at http://www.voodoosource.net

Many thanks to Nautis for providing me with the information necessary to complete these.  Many thanks also go to NuAngel over at 
http://www.nuangel.net fro providing these leaked V5 6000 drivers for everyone to use.